Smokeymance's Denali Build

[FamilyTruckster]

got some 4.5" exit pipes just collecting dust...............

 

[Smokymance]

You guys ever seen Bell Tech springs bind up so much?

Recently i been noting the ride being stiffer and stiffer, and the air ride trying to compensate height more and more.

 

[07Burb]

Wow

 

[TheAutumnWind]

You guys ever seen Bell Tech springs bind up so much?

Recently i been noting the ride being stiffer and stiffer, and the air ride trying to compensate height more and more.

View attachment 183858

those look to be toasted. Time for replacements.

 

[gat0r]

cant say i have seen springs do that,
unless someone put a torch on them too long.


yeah that ride quality may be a wee bit stiff , lol

 

[Rocket Man]

Awesome build, glad to see this thread get revived. Never seen springs do that.

 

[Jonah52]

Wtf is up with that solid rear end

 

[08grey]

You guys ever seen Bell Tech springs bind up so much?

Recently i been noting the ride being stiffer and stiffer, and the air ride trying to compensate height more and more.

View attachment 183858

I have my stacked part of the coil at the top of the suspension not the bottom. I was pretty sure that's how it's supposed to go. One of us has the spring upside down?

Sent from my SM-G950U using Tapatalk

 

[08grey]

Anybody know if the beltech Spring should have the close collapsed part of thd coil Spring at the top or the bottom?

Sent from my SM-G950U using Tapatalk

 

[Rocket Man]

Anybody know if the beltech Spring should have the close collapsed part of thd coil Spring at the top or the bottom?

Sent from my SM-G950U using Tapatalk

@NORCAL SS will know, he's the guru on suspension.

 

[Smokymance]

So its been quite a few years this thread hasnt been updated, but this truck is still around!!!
Broke a ring land on piston number 7, scaring the sleeve beyond repair...so we went iron block, forged the pistons, new cam and stall, injectors and all the other little stuff that costs more than they should :=)
Thought id share with guys here!

 

[Rocket Man]

So its been quite a few years this thread hasnt been updated, but this truck is still around!!!
Broke a ring land on piston number 7, scaring the sleeve beyond repair...so we went iron block, forged the pistons, new cam and stall, injectors and all the other little stuff that costs more than they should :=)
Thought id share with guys here!

Looking good!

 

[Fosscore]

So its been quite a few years this thread hasnt been updated, but this truck is still around!!!
Broke a ring land on piston number 7, scaring the sleeve beyond repair...so we went iron block, forged the pistons, new cam and stall, injectors and all the other little stuff that costs more than they should :=)
Thought id share with guys here!

Nice. Sound clip by chance??