Show off your 2015-2020 lowered tahoes and yukons

[P_E_O_P_L_E_S]

thanks for the reply. I will probably put new struts and rear shocks and see if that helps. Do you guys recommend the belltech sp? I want to keep ride as comfortable as possible. It doesn’t ride bad now just the knocking or cluttering noise at low speed is driving me crazy. It’s like there’s play in it somewhere. Yes I know the 20s were a lot more forgiving and the 24s will change ride quality but it isn’t that bad once I can get rid of this noisy front end. I didn’t do rear travel mod. I don’t tow with it and drive an easy 6 mile commute to work. Unfortunately that’s when I hear this noise. On highway I don’t hear it and it feels pretty smooth.

maybe a little late but I put on Belltech so shocks and struts on my 19 suburban (non mag/auto) and while it did make the ride more controlled it does make the surface imperfections more noticeable. On the highway it does ride nice but in the slow city speeds with bumps/cracks they are felt more. The smaller tires 305/35 don’t help either but it looks good to me.

 

[P_E_O_P_L_E_S]

Ended up removing all spacers in the rear which came out to about 4”, dropped the front with spindles and struts to 3 and 3.5 fit the Chevy lean. I added the end links and just did the free travel mod. The rear is loaded a bit right now with the air lift bags having about 10psi in them. Love the look so far.

 

[Staggered 02]

Finally got around to taking a few shots of the Esky. Here it is guys, just had her paint corrected and ceramic coated lowered with 2/4 belltech lowering kit ( need to lower the rear about a half inch) 26” forgiato ECL wheels, blacked out all the chrome. Also have the corsa full exhaust with afe CAI. Future mods are a tune by (HP or Black Bear) some sway bars and wilwood big brake kit.

Sent from my iPhone using Tapatalk

Very very nice. Well done

 

[lynxnova]

Very very nice. Well done

Hey what’s up staggered? Thank you man all you guys have inspired me to get this done the right way.


Sent from my iPhone using Tapatalk

 

[Staggered 02]

^^^ yes sir. Glad to hear and to see the finished product. I am back home (Fl) for a while. I have a small list of things to get done on the rides. Keep up the great work!

 

[lynxnova]

^^^ yes sir. Glad to hear and to see the finished product. I am back home (Fl) for a while. I have a small list of things to get done on the rides. Keep up the great work!

Yes please keep us posted on the list, I love to see the truck done


Sent from my iPhone using Tapatalk

 

[lynxnova]

One more pic just because [emoji1377]

Sent from my iPhone using Tapatalk

 

[jason72g]

MaxTrac 2” leveling kit.

 

[BADRIDES]

MaxTrac 2” leveling kit. View attachment 305157View attachment 305158

Good upgrade

 

[joe_joe]

MaxTrac 2” leveling kit. View attachment 305157View attachment 305158

Nice setup! Would you happen to have the link or could you provide me with what you ordered? I went on their site and am not having any luck.

 

[Andy Schmidt]

Front is universal air strut bags over Bilstein 5100s. Rear is TBSS bags with 1/4 quick connect fitting tapped. Air management is Airlift 3H with dual 444C compressors and dual Seamless tanks 6x28. Wheels are 24x9.5 Status Juggernaut custom powder coated gloss black. 305/35 Yokohama

 

[RThomasII]

Front is universal air strut bags over Bilstein 5100s. Rear is TBSS bags with 1/4 quick connect fitting tapped. Air management is Airlift 3H with dual 444C compressors and dual Seamless tanks 6x28. Wheels are 24x9.5 Status Juggernaut custom powder coated gloss black. 305/35 Yokohama



View attachment 344396

You absolutely killed it! Any pics of the air-ride install?

Totally off topic question but what dashcam are you using and how do you like it? Been thinking of getting one installed but undecided on what to get.

 

[Andy Schmidt]

Have since installed an additional tank.
It’s a Rexing V1P. Love it. Actually caught a rockslide on it while driving to Pikes Peak where I took this picture

 

[Pivot]

Ended up removing all spacers in the rear which came out to about 4”, dropped the front with spindles and struts to 3 and 3.5 fit the Chevy lean. I added the end links and just did the free travel mod. The rear is loaded a bit right now with the air lift bags having about 10psi in them. Love the look so far. View attachment 279351View attachment 279351

Nice looking Burb! Well executed

 

[Eddie Rivera]

Belltech 2" Spindles, Belltech Adjustable struts, Belltech 4" Drop springs. Works out to about a 3ish"/4" drop. Like a dumbass, I didn't measure before lowering it.

 

[joe_joe]

Belltech 2" Spindles, Belltech Adjustable struts, Belltech 4" Drop springs. Works out to about a 3ish"/4" drop. Like a dumbass, I didn't measure before lowering it.
View attachment 346583View attachment 346584View attachment 346585

Eddie, this thing is on point man!

Would mind sending me the links to what you bought? I have been looking around and would like to lower my '15 Suburban.

 

[Eddie Rivera]

Eddie, this thing is on point man!

Would mind sending me the links to what you bought? I have been looking around and would like to lower my '15 Suburban.

Sent you a DM.

 

[P_E_O_P_L_E_S]

Belltech 2" Spindles, Belltech Adjustable struts, Belltech 4" Drop springs. Works out to about a 3ish"/4" drop. Like a dumbass, I didn't measure before lowering it.

What size wheels and tires you have on that? I love the way it looks! If black wasn’t such high maintenance I definitely would’ve got a black suburban.

 

[Eddie Rivera]

Thank you. The wheels are 26x10 ET +25 and the tires are 295/30/26. And I totally agree that black is a pain in the ass. I don't know why I do it to myself. Lol

 

[gat0r]

^ b/c its beautiful when clean