Randeez 2012 Budget Yukon Denali Build (stick on hood scoops galore)

[Tonyrodz]

View attachment 287414View attachment 287415View attachment 287428View attachment 287440

Just curious--have you weighed all that rear hvac after ripping it out?

 

[Rocket Man]

Ac about done, need a high side service port and should be ready to charge. And ps/brake booster mounted View attachment 287332View attachment 287337View attachment 287338

You’re really rockin those lines.

 

[pwtr02ss]

"Meth bung"

Coming along nicely! Ac lines look great. I never thought about building them at home until I was looking at the blue things on yours. Never seen those before.

skirtless...I'll reserve opinion until I see it at ride height

 

[randeez]

Just curious--have you weighed all that rear hvac after ripping it out?

Its not very heavy...maybe 20-25lbs. I'm replacing it with 100lbs of water tho lol

 

[randeez]

I'm going to give this mod a 0/10

 

[randeez]

 

[Rocket Man]

View attachment 297297View attachment 297298

It actually fit or did you have to make it fit?

 

[randeez]

Not even close,
sectioned out that chunk, melted it back together but has a couple pin hole leaks I need to fix.
Heated up the whole side that goes over the tire and caved it in so it would round the wheel well. Had to bend some metal at the c pillar that was forward to the side, grind down some self taping screws on some crap that was mounted behind the tail light into the space.

 

[randeez]

I ordered some 1-1/2" marine "thru hull" fittings to use to supply the pump thru the floor, that will be mounted underneath. Going back into the tank I didn't want to go right next to the supply so I need to figure out how to dump the other hose back in up higher or in the front

 

[Doubeleive]

I'm going to give this mod a 0/10
View attachment 297276View attachment 297277View attachment 297278

figured that is what you where going to do I just wasn't sure if it was plastic or metal couldn't tell from the stock photo