Quad exhaust

[Juanillo2023HC]

So I use to have the 6.2 withthe cool quad tips, Looking on the threads … guys have added this changing out the bottom skirt and adding the tips.

Here’s my question has anyone thought of how, done or tried to do the quad tips
On the DMax?

I know there are
Exhaust kits out there for the 3.0 on the Silverado’s, even withe the dual exits.
My thought is changing out the skirt, going to my muffler shop guy and have him use what he can out of say the MBR Silverado kit and add the tips.

Thoughts? Idea on what it my sound like ?

I’m I LOCO

 

[Pro299]

For looks, could probably be done but it won't change the sound much. No muffler on the 3.0. By the time the exhaust gets through the turbo, DPF, EGR system and the cat there's not much sound left.

 

[Juanillo2023HC]

For looks, could probably be done but it won't change the sound much. No muffler on the 3.0. By the time the exhaust gets through the turbo, DPF, EGR system and the cat there's not much sound left.

Thanks Pro299, Im gonna look into it and see what size it has and what the aftermarket offers.. Im assuming 3"?

Wasn't hoping to change the sound, so that works, haven't had a chance to look underneath.

This one has 4" tips/3" pipe , haven't really heard about the brand tho

AFE Vulcan 304 Stainless Steel DPF-Back Exhaust 20-22 GM 3.0L Duramax LM2

Check out the deal on AFE Vulcan 304 Stainless Steel DPF-Back Exhaust 20-22 GM 3.0L Duramax LM2 at Diesel Power Products

www.dieselpowerproducts.com

 

[jmzvet]

I’m going to add quad tips when I finally take delivery on my 23 Denali Duramax.
I had my exhaust guy do a quad tip setup on my Silverado Trail Boss. Definitely go with 4in tips.

 

[Juanillo2023HC]

I’m going to add quad tips when I finally take delivery on my 23 Denali Duramax.
I had my exhaust guy do a quad tip setup on my Silverado Trail Boss. Definitely go with 4in tips.View attachment 390870

Sweet!, love that look

Picked up the rear lower trim piece, ordered some CF MRBP dual tips, 4”, now need to find a local shop to help with the fabrication. It looks like the Borla or Corsa dual exhaust set up should work minus the muffler… expensive route tho.

I’ll post pictures as I work thru it

 

[DuraYuk]

Sweet!, love that look

Picked up the rear lower trim piece, ordered some CF MRBP dual tips, 4”, now need to find a local shop to help with the fabrication. It looks like the Borla or Corsa dual exhaust set up should work minus the muffler… expensive route tho.

I’ll post pictures as I work thru it

Love to see the progress. I want to do the same thing.

 

[jmzvet]

Sweet!, love that look

Picked up the rear lower trim piece, ordered some CF MRBP dual tips, 4”, now need to find a local shop to help with the fabrication. It looks like the Borla or Corsa dual exhaust set up should work minus the muffler… expensive route tho.

I’ll post pictures as I work thru it

Do you know the part number on the lower trim piece?
Thanks

 

[Juanillo2023HC]

Do you know the part number on the lower trim piece?
Thanks

84751055

 

[jmzvet]

Where did you buy yours?

 

[Juanillo2023HC]

from my local Chevy house, weird,tho,they charged me a core charge?$ 75.00.

you can order from gm parts direct tho

 

[Toasty]

This wouldn't affect backpressure?

 

[Juanillo2023HC]

Not that I’m aware of they make em for
The Silverado, if anything it may help free up some back pressure,

Same as a banks or MRBP, I would think

 

[Juanillo2023HC]

Here ya go!

Went with the Borla dual exit, CB FINISH for the 6.2.. muffler shop basically used the back end, its a straight shot from there to the DPF. They did have todo minor mods around spare tire. All other was left along. Very happy with it, no change in exhaust sound that I can tell.

Cheers!

 

[Brand0n]

Looks great. What was the total cost all in?

 

[Juanillo2023HC]

Exhaust was 2200 , install 500.00

The Carbon Fiber tip kit was more $$$ than the other kit

 

[Texanfisherman]

Exhaust was 2200 , install 500.00

The Carbon Fiber tip kit was more $$$ than the other kit

Looks really good and yours is the first I have seen done. Long term update? Any idea why factory did not do it?

 

[Macrez21]

Looks really good and yours is the first I have seen done. Long term update? Any idea why factory did not do it?

Second this, good find

 

[Macrez21]

Here ya go!

Went with the Borla dual exit, CB FINISH for the 6.2.. muffler shop basically used the back end, its a straight shot from there to the DPF. They did have todo minor mods around spare tire. All other was left along. Very happy with it, no change in exhaust sound that I can tell.

Cheers!View attachment 391654View attachment 391655View attachment 391656

I just realized, your plates are my initials lol

 

[blkonblk]

Here ya go!

Went with the Borla dual exit, CB FINISH for the 6.2.. muffler shop basically used the back end, its a straight shot from there to the DPF. They did have todo minor mods around spare tire. All other was left along. Very happy with it, no change in exhaust sound that I can tell.

Cheers!View attachment 391654View attachment 391655

looks great - will do this next. Do you have the part number of the Borla you purchased?

 

[Fless]

looks great - will do this next. Do you have the part number of the Borla you purchased?

FYI He's not been on here in a year.