Picked up a new toy!!!

[NORCAL SS]

i need to get pics up of the new box lol

 

[Tahoewhat]

I wanna see that turbo put in the Fiat.

any plans to mess with the engine or turbo at all?

 

[NORCAL SS]

got the new jl 10w6v3 in their ported box. Bass is amazing

 

[08grey]

That's one expensive box. Fits nicely. I really hope you have a additional insurance policy on that pocket rocket.

 

[NORCAL SS]

Yup sure do.

 

[NORCAL SS]

I'm keeping this in my vendor section due to the fact I can edit it much easier.

DYNO SESSION #1 Today 12/7/13

Mods are
Road Race Intake
ATM FMIC
Ported 2.5 exit on oem downpipe
2.5 inch cat back custom magnaflow

I did 2 pulls with the car with above mods and 91 octane gas and hood closed. Coolent temp on both passes was from 160-162 and air intake on both passes 89-90. I kept it very consistant
SAE NUMBER
Best HP 183.2
Best TQ 188.2

I then installed the New Road Race Ultimate box. I will be doing another dyno session to test the "80 mile" required driving before getting on it and seeing if it will make more power next Saturday.

Coolent temps from 160-164
Air intake temps from 89-90
SAE NUMBERS
BEST HP 197.2
BEST TQ 208.0

STADARD NUMBERS

Here is uncorrected

The car does feel faster no doubt about that. I will now reset the battery in the morning and drive 100 miles before next Saturday. Stay under 4k and whats good in san francisco we have hills and all that so will be not only flat roads on so called "learning phase"


oh yah video
http://s10.photobucket.com/user/NORCALSTI/media/ABARTH/20131207_143424.mp4.html

 

[NORCAL SS]

LITTLE vid from today. The street im filming on was the ending chase scene for the movie BULLITT. Where i start moving is where the car crashed into the gas station..... now its a business park

http://www.youtube.com/watch?v=UvDn-J-U7aw

 

[NORCAL SS]

Just a few pics of my car and my buddys Mach 1. We built his car in his small garage. Also converted it to a 5 speed temec along with a full air ride coilover set up in it front/rear and now going to do a ccw 18x9 front and 18x11 rear. Car will look sweet when done.

 

[NORCAL SS]

DYNO #3 UPDATE 2/1/14
well the NEW MADNESS unit is good!!

So got to the shop early this morning and remember ive had the tmc unit in for about 300 miles now so fully broken in. Did a few passes with it on setting 9 and go from 190-194 hp and 215-219 torque. one thing we noticed on the dyno is that the original tmc unit was very jumpy. So put in the new madness unit with cam sensor and first pass got 204 hp and 224 torque.

We ended up getting 207.4 hp and 227.1 torque out of the new madness box
and ended up gettign 194.7 hp and 219.4 torque out the old tmc unit.
BOTH AT SETTING 9

You will notice that the new madness unit carrys power longer and smoother vs the original tmc box and driving it home I noticed the same. I will reset the ecu and then drive 100 miles at low rpms and then schedule another dyno day to see how it does. My plan is also do get the new road race box and do another test so i will have the road race vs the madness new box on the same day. So far the car feels the fastest on the madness new box vs the old tmc and vs the road race v3 ultimate.

 

[NORCAL SS]

new indash pic set up

whtie out the lettering on tires

 

[nhoj_yelbom]

digging the JL and Kenwood DD good choice!

---------- Post added at 01:29 AM ---------- Previous post was at 01:19 AM ----------

like the frontmount also!

 

[edgaranah1]

I would love one of these.


Sent from my iPhone using Tapatalk

 

[NORCAL SS]

Well i ordered the new 2015 z06 so onto a new project so this car is for sale now

http://www.ebay.com/itm/301361804526?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1558.l2649

 

[jdpber]

well i ordered the new 2015 z06 so onto a new project so this car is for sale now

http://www.ebay.com/itm/301361804526?sspagename=strk:meselx:it&_trksid=p3984.m1558.l2649

nice