Only one way to find out.
Didn't you have one of yours go out?
Did it spit on you DIC?
Opinions on Potential Denali Mods ...
- Thread starter soulsea
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Didn't you have one of yours go out?
Did it spit on you DIC?
Nope, ours are good. Had one act up when we first bought it but nothing since. No DIC light either.
Okay so a quick update on the assist step thingie.
The system goes like this. Harness from computer > module, harness from module to power step motor.
Simply disabling the power steps is simple::
- If you just unplug the motor the power steps are disabled and no error codes.
However, to remove the steps completely:
- If you unplug the harness that goes from the comp. to the module from the module he computer spits out a blind zone alert error.
So you say:
- Well just unplug the motor and leave the module behind, problem fixed.
Well ...
- The module that controls the assist step and blind zone alert is attached to the freaking steps and not the body of the truck!!!
So in order to remove the power steps from these trucks without getting a code the procedure is as follows:
1. Unplug motor harness
2. Unplug harnesses going in and out of the module.
3. Remove steps from truck
4. Remove module from steps
5. Temporarily attach module to truck frame with 3M and/or zip ties.
6. Reconnect harnesses going in and out of the module.
7. Zip tie harness that goes from module to motor.
Hopefully this info is useful to someone down the road, and they'll know how to remove the power steps and stay error code free.
Oh and I had other things to do so we didn't see it through ... so the steps are still on the truck.
The system goes like this. Harness from computer > module, harness from module to power step motor.
Simply disabling the power steps is simple::
- If you just unplug the motor the power steps are disabled and no error codes.
However, to remove the steps completely:
- If you unplug the harness that goes from the comp. to the module from the module he computer spits out a blind zone alert error.
So you say:
- Well just unplug the motor and leave the module behind, problem fixed.
Well ...
- The module that controls the assist step and blind zone alert is attached to the freaking steps and not the body of the truck!!!
So in order to remove the power steps from these trucks without getting a code the procedure is as follows:
1. Unplug motor harness
2. Unplug harnesses going in and out of the module.
3. Remove steps from truck
4. Remove module from steps
5. Temporarily attach module to truck frame with 3M and/or zip ties.
6. Reconnect harnesses going in and out of the module.
7. Zip tie harness that goes from module to motor.
Hopefully this info is useful to someone down the road, and they'll know how to remove the power steps and stay error code free.
Oh and I had other things to do so we didn't see it through ... so the steps are still on the truck.
- Joined
- Jan 3, 2011
- Posts
- 50,936
- Reaction score
- 19,335
What is it you're trying to do to your assist steps??
What is it you're trying to do to your assist steps??
Learn their naughty ways.
JennaBear
Resident Ninja
Out of those two, SLP.
felixgun
Full Access Member
Volant uses a real high grade of stainless steel. Not sure about the other one.
JennaBear
Resident Ninja
I take that back, I think I like the Corsa looking tip of the Volants. Might have to see what price I can get them for 
JennaBear
Resident Ninja
Yep, Corsa, Volant, SLP, Magnaflow, Flowmaster, MBRP....the list goes on (and that is just for exhaust).
JennaBear
Resident Ninja
Shoot me an email to remind me: [email protected]
My only concern with the Volant, it says it is for 07-09? I wonder if they just have not updated their site?
My only concern with the Volant, it says it is for 07-09? I wonder if they just have not updated their site?
Meh it's the same and it's just a tip.
A lot of vendor sites put a compatibility chart when they list the part and never go back to update it ... if only there were a vendor on TYF so super awesome as to double check for me.
---------- Post added at 02:29 PM ---------- Previous post was at 02:23 PM ----------
... and email sent.
A lot of vendor sites put a compatibility chart when they list the part and never go back to update it ... if only there were a vendor on TYF so super awesome as to double check for me.
---------- Post added at 02:29 PM ---------- Previous post was at 02:23 PM ----------
... and email sent.
JennaBear
Resident Ninja
I hope said Vendor pipes up soon 
I hope said Vendor pipes up soon
Jenna, it's not 5pm yet ... put down the drinkie poo and try again.
---------- Post added at 03:42 PM ---------- Previous post was at 03:39 PM ----------
Wait ... it's me who's drunk.
Took me a while to decipher syntax and meaning of what you said.
JennaBear
Resident Ninja
Volant is on backorder, still looking into SLP, but in the meantime, I found this gem! Yes, that would be Corsa...
JennaBear
Resident Ninja
Corsa 14037
