Need help with pioneer cd player in 2002 yukon

[blur929rr]

I have a 2002 Yukon without bose and no onstar. It has the tape deck and the factory 8" woofer in the back. I'm trying to put a pioneer cd player in and it powers up and appears operational but i'm not getting any sound out of the speakers. I tried hooking the remote amp wire up to the pink wire on the small harness and still have no sound. Please help.

 

[carcrz]

im not sure but i think you need to by pass the factory amp

 

[skyl3rm]

I have a 2002 Yukon without bose and no onstar. It has the tape deck and the factory 8" woofer in the back. I'm trying to put a pioneer cd player in and it powers up and appears operational but i'm not getting any sound out of the speakers. I tried hooking the remote amp wire up to the pink wire on the small harness and still have no sound. Please help.

I bet this will be the same as my 01 tahoe..

I just had this problem a few weeks ago.. you take the pink wire from the 2nd harness (one on bottom of stock deck) and connect it into blue/white on pioneer harness

let me know if that doesnt make sense....


There was 2 harness' plugged into the stock deck.. the bottom one has a pink wire... Just cut it and connect it up to the blue/white wire thats on the pioneer harness and it'll work.

 

[blur929rr]

I tried hooking the blue/white to the pink and still got nothing. As soon as I hook the factory CD player up it all still works fine. Any other suggestions?

 

[tjr5150]

The pink wire is the power for the stock amp. Hook the pink wire to the remote power for a amp on the new harness, not the power anttena wire, but the remote turn on wire.

 

[blur929rr]

That's what I did. I hooked the blue/white on my pioneer harness to the pink wire on the small plug and still got no sound.

 

[skyl3rm]

Let me check tomorrow and make sure thats where the pink ones hooked up to.. but im almost positive...

---------- Post added at 01:07 AM ---------- Previous post was at 01:03 AM ----------

Might check the harness for the pioneer but
Run the remote turn on from your new stereo to the pink wire on the harness.. That should do the trick. I thought it was the blue/white one but I could be wrong..

 

[gdddup]

it was the pink wire on my 00 yukon. check all your connections..could be somethin simple

 

[denali02]

see i ended up hooking the blue with the the acc wire to turn the amp on i think because the pink wire wouldnt turn on the amp either also i have a 02 denali

 

[skyl3rm]

yeah.. the info I posted was what I did on my 01 Tahoe.
I dont know, but wouldnt think the same year range denali and yukons would be much different.

 

[blur929rr]

Denali02, can you please explain a little more on what you did. Which blue wire did you hook to accessory?

 

[chip]

WalMart sells the wire harness for your truck and it's only like $10. You should get that.

 

[blur929rr]

I bought the wiring harness at my local audio store but it doesn't account for the factory amp

 

[chip]

The Bose harness does. It's like $30. You could get that, or you could just check the wiring diagram in the Haynes manual and/or the HU booklet.

 

[blur929rr]

Is the Bose harness the same as the non-bose with the factory sub in the back?

 

[Keanen55]

I remember having to do a jump wire on the blue wire. I hate that I can't remember. I was a while ago

 

[chip]

Is the Bose harness the same as the non-bose with the factory sub in the back?

I would imagine that they would be interchangeable, seeing as how you have a factory amp/sub combo. It's probably the Bose system backbone.

 

[blur929rr]

Got it figured out.... had to tie the blue/white remote turn on wire from the CD player to the solid blue "power antenna" on the harness.