Left brake light loose?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

BlueCollarTahoe

Full Access Member
Joined
Sep 21, 2016
Posts
553
Reaction score
120
anyone know which way i should go? the left brake light gets loose time to time, should i change out the socket? seems the bulb pushes in pretty well just loosens up after a while
 

Big Mama

Full Access Member
Joined
Jul 21, 2015
Posts
3,881
Reaction score
2,499
Location
Virginia
Are you using dialectic grease when installing? Also the housing around the bulb base get corroded.
 
OP
OP
BlueCollarTahoe

BlueCollarTahoe

Full Access Member
Joined
Sep 21, 2016
Posts
553
Reaction score
120
Only the left?

What happens if you swap bulbs from side to side?
honesty the right one someties blink too but isnt as loose or dim as the left i think i did swap em at one point but im not sure.

Are you using dialectic grease when installing? Also the housing around the bulb base get corroded.

not lately but i could use it. if it was corroded it wouldnt work period right? the lighrs before the led was always working.
 

Doubeleive

Wes
Supporting Member
Joined
Nov 7, 2017
Posts
30,526
Reaction score
47,955
Location
Stockton, Ca.
I just bend the tabs in the socket inward a little bit with a small screwdriver so the bulb goes in nice and snug that usually prevents the bulb coming loose
 

Big Mama

Full Access Member
Joined
Jul 21, 2015
Posts
3,881
Reaction score
2,499
Location
Virginia
Rust causes bad connections and may work on and off. How long have you had the LED lights? Everything was good before them?
 
OP
OP
BlueCollarTahoe

BlueCollarTahoe

Full Access Member
Joined
Sep 21, 2016
Posts
553
Reaction score
120
today i took them out and put in some cheap regular bulbs...were off. i went through the fuses and one of them were blown it seems. i put a new one and the brake lights were back.
 

05Single

afraid of the dark
Joined
Feb 26, 2015
Posts
8,243
Reaction score
11,639
I bend the wires out on the bulb itself . Dielectric grease helps.
 
OP
OP
BlueCollarTahoe

BlueCollarTahoe

Full Access Member
Joined
Sep 21, 2016
Posts
553
Reaction score
120
can anyone reccomend a good brand of bright LED lights with solid bases to them? it seems the cheap LED light bulbs bought off amazon werent fitting real snug like the cheap bulbs from autozone do. i want the bright LED in all the lights not the old bulbs.
 

Big Mama

Full Access Member
Joined
Jul 21, 2015
Posts
3,881
Reaction score
2,499
Location
Virginia
If you go to the 2007-2014 forum and type LED in the search there are dozens of pages.
 

Forum statistics

Threads
137,721
Posts
1,990,394
Members
102,711
Latest member
johnsonwillie199
Back
Top