It JUST came in

[BlizzardX23]

Apple Vs Microsoft...? If it wasnt for Microsoft...Apple wouldnt be where they are today..and stocks are reflecting Apples excellent marketing skills....not their systems...

but seriously...lets drop the whole Mac vs PC...is all personal pref. and there will never be an end...

 

[Rollin Thunder]

macs are better, fact. theres the end.

 

[BlizzardX23]

ok

 

[Rollin Thunder]

ok

one jast jab. lol

 

[BlizzardX23]

..seriously...make another thread for this if we wanna talk about mac vs PC...

---------- Post added at 03:44 PM ---------- Previous post was at 02:59 PM ----------

how the HELL do I remove the rear AC system??...

---------- Post added at 03:45 PM ---------- Previous post was at 03:44 PM ----------

I got the screws holding it to the wall...isnt there one on the bottom somewhere? I cant see where it is...do I need to get underneath the truck and do it?

 

[COTahoeLS]

When something doesn't budge... either..

A) You're not pulling hard enough

or

B) You need to cuss some more

or

C) Get a big ******* hammer and/or crowbar and MAKE it budge

or

D) not drunk enough to realize the screws, bolts, nuts you're looking for are right in front of your eyes after looking for 3 hours.





Don't ask me how I know these things...

 

[BlizzardX23]

Im actually trying to get this done...looking for real answers so I can finish posting this project...

 

[COTahoeLS]

ok

 

[BlizzardX23]

ok found it...there are two nuts on the bottom side of the truck...undo those to allow the studs to come up from the top (inside the truck)

---------- Post added at 04:22 PM ---------- Previous post was at 04:11 PM ----------

FCK!!! Now I have to pull the AC lines???

---------- Post added at 04:27 PM ---------- Previous post was at 04:22 PM ----------

I undid one of the AC lines and Im guessing it was Freon? that sprayed all over me? I tightened it back up..wtf...how do I get the REAR AC unit out?

 

[Rollin Thunder]

DRAIN THE SYSTEM!!!! lol. Then drink more beer. Seriously. those lines are pressureized. Its gunna spray at you. But it wont spray as much. Are the lines not long enough to just move it out of the way for the time being???

 

[Copper&Black]

I just took the front cover for the tubes leading to the upper most core, and then you get some play in with the unit back and forth. Also remove the rear a/c fan, it will have a hole straight to the other side. Don't remove the unit, I got everything by pre-peeling 10" squares and carefully tucking them behind the unit and sticking them...

Sorry you are having trouble...
The top arrow is the fan, and bottom arrow is where that tube support is held down....

---------- Post added at 08:06 PM ---------- Previous post was at 08:01 PM ----------

Oh, and it helps to remove all the retaining clips around the unit, so the two halfs can move somewhat independently of each other...

 

[BlizzardX23]

no...they are preformed metal tubes with the rubber sections here and there...but I was able to move the system enough to get my hands in there and lay the dynamat...Im finishing the lower wall section right behind it...Im taking pics...so I'll post when Im done

 

[ecordell]

Blizzard, when you get done with this, you shouldn't hear shit from the outside when you're rollin lol. It'll be like you're in a padded cell lol

 

[BlizzardX23]

Releasing AC unit from wall

Nuts holding the AC unit down

Under the AC unit

Behind rear AC unit (between AC and Wall)

Unbolting seat belts for complete coverage

Slept from like...8:00PM to 10:30PM...went out and finished the wall at 11:00PM

AC system re-installed (bolted back into place)

I put Dynamat down then put the stock wheel-well insulation back on

 

[COTahoeLS]

You really went to town on that ******...

Gonna feel like riding in a limo. Can't wait to hear how many times you grind your starter thinking you haven't started the truck yet. LOL

 

[BlizzardX23]

Can't wait to hear how many times you grind your starter thinking you haven't started the truck yet. LOL

 

[Rollin Thunder]

You really went to town on that ******...

Gonna feel like riding in a limo. Can't wait to hear how many times you grind your starter thinking you haven't started the truck yet. LOL

To bad 03 and up wont let you. Go try and turn your key when its running. It wont do anything. The computer is to smart. lol

---------- Post added at 04:28 PM ---------- Previous post was at 04:27 PM ----------

fail on both of you. lol

 

[BlizzardX23]

Specially since Im taking the Flowmaster off and finding the most quiet exhaust possible

 

[Rollin Thunder]

Specially since Im taking the Flowmaster off and finding the most quiet exhaust possible

---------- Post added at 04:29 PM ---------- Previous post was at 04:28 PM ----------

for quiet. Corsa touring, or stock.

 

[BlizzardX23]

To bad 03 and up wont let you. Go try and turn your key when its running. It wont do anything. The computer is to smart. lol

---------- Post added at 04:28 PM ---------- Previous post was at 04:27 PM ----------




fail on both of you. lol

I know that..It was just funny...you turn the key and it stays quiet...I've done that a few times when I first bought the truck because it was so much quieter then my Ranger...then hit the gas to find out if it was running or not

---------- Post added at 01:30 PM ---------- Previous post was at 01:30 PM ----------

lol...wtf is that for??