I want to go lower

[lx4life]

hey jimmyp I will buy the extenders off you, let me know when u want to sell them.

 

[Jimmyp19]

As soon as I get them ....

 

[Jimmyp19]

http://tbssowners.com/store/index.php?act=viewProd&productId=106

this kit?

 

[NORCAL SS]

since you bypassed autoride yes that kit will get you where you want.

 

[Jimmyp19]

since you bypassed autoride yes that kit will get you where you want.

Update...

Sorry, your order failed!

You can attempt to purchase your basket contents again below:
Try Again

Any reason I got this message?





Thanks again





jimmy

 

[lx4life]

hey jimmy just call or text him at 415 519 2432

 

[NORCAL SS]

order went thru ready to roll

 

[Jimmyp19]

order went thru ready to roll

Right no brother perfect......


now with having the drop spindles and adding the drop struts, am I going to need anything else to assist in the alignment?

 

[NORCAL SS]

you might need camber bushings. I would put the rear spring in first with no spacers and adjsut the links then lower the front accordingly. usually with the 2/3-4 drop you dont need camber bushings in front.

 

[Jimmyp19]

you might need camber bushings. I would put the rear spring in first with no spacers and adjsut the links then lower the front accordingly. usually with the 2/3-4 drop you dont need camber bushings in front.

right, but seeing as I already have the 2 inch drop spindles in the front, and I am going to be adding 1 to 2 more inches of drop in the front...it could work out to a 4 inch front drop right?

 

[NORCAL SS]

your front is sitting high. I would put the rear kit in first and adjust it in. Lets say you put the rear springs in and its like 1 inch lower then you would put the front struts on wiht only a 16mm spacer and see where it sits.