foreverfalcon40
Full Access Member
- Joined
- May 3, 2009
- Posts
- 2,082
- Reaction score
- 4
I've been on GMFS! I REALLY DO MISS when YOU GUYS!! Their not to fond of MODDING OF MODDING OBS!
So hopefully as of AUGUST, I will be getting a BB tune if it falls through the the NY, CT, PA area (if your interest PM i will send you details).
I have $500-600 to spend before the tune.
WHAT am I to spend it on?
Ideally I would like...
MSD Ignition..I'm going to buy used. So MDS 6A box is needed...but when buying used what should I be looking for to make sure its complete? Also will wires from a 71 vette fit? I found them BNIB fby MSD for $50 from a local. THATS A STEAL and the coil I'd get via ebay. When its all said and done I'd love to mate them to E3's b.c they were bench tested on HPTV months ago.
I would lov eto do Efans...I've talked to Archie a lil bit and he's been greatful. After reading such horror stories I would love to wire them so they run like stock fans. Just would like some insight before I call JUSTIN at BB. I dont wanna sound like a complete retard! Also what fans do you see best fit four the OBS?
TB's: Thanks to Archie I'm going to upgrade to
http://marine-performance-parts.com/cfmtechportedthrottlebodyfor96gmtruckvortec5057.aspx
But I'm still in the works since there are other option I'm currently picking his brain with!
I got a Wb for my dsm so i have a nb a/f gauge left over. CAN I HARD WIRE IT to my pcm? If so where?
XOXOXO MISS YOU GUYS HOPE ALL IS WELL!
So hopefully as of AUGUST, I will be getting a BB tune if it falls through the the NY, CT, PA area (if your interest PM i will send you details).
I have $500-600 to spend before the tune.
WHAT am I to spend it on?
Ideally I would like...
MSD Ignition..I'm going to buy used. So MDS 6A box is needed...but when buying used what should I be looking for to make sure its complete? Also will wires from a 71 vette fit? I found them BNIB fby MSD for $50 from a local. THATS A STEAL and the coil I'd get via ebay. When its all said and done I'd love to mate them to E3's b.c they were bench tested on HPTV months ago.
I would lov eto do Efans...I've talked to Archie a lil bit and he's been greatful. After reading such horror stories I would love to wire them so they run like stock fans. Just would like some insight before I call JUSTIN at BB. I dont wanna sound like a complete retard! Also what fans do you see best fit four the OBS?
TB's: Thanks to Archie I'm going to upgrade to
http://marine-performance-parts.com/cfmtechportedthrottlebodyfor96gmtruckvortec5057.aspx
But I'm still in the works since there are other option I'm currently picking his brain with!
I got a Wb for my dsm so i have a nb a/f gauge left over. CAN I HARD WIRE IT to my pcm? If so where?
XOXOXO MISS YOU GUYS HOPE ALL IS WELL!