HD Hood Swap

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

S33k3r

Full Access Member
Joined
Aug 14, 2017
Posts
2,254
Reaction score
2,977
Location
Dallas, Texas
I really need to find one of these now.
These are all over Texas, in various conditions. I think $200 is the cheapest I've seen, and $500 is the worst. You stand a decent chance of getting the right color, too, at the upper end. I see HD truck part outs all the time on Facebook marketplace; they also sell 5he hoods separately, but that's how the pricier ones are found.
 

Kerrythomas

TYF Newbie
Joined
May 28, 2022
Posts
2
Reaction score
0
This is even true with the GM HD hoods. I picked mine, like many other guys, directly off a parted out 2002 Chevy Silverado HD. It fits directly to the 6 bolts holes on the hinges, however the fender to hood gap is noticeably spread wider. Maybe a millimeter or two (+/-).

But it fits at the cowl, the grille and the lights as well. There is tiny gap between the hood and the black rubber spacers. There is just something about the seams and if you read the many HD threads, you will see this is well discussed. Some fit better than others, however there isn't really much to adjust (without starting to push in on body panels, etc...). as you only have 6 bolts. I have looked at HD Silverados driving down the road and noticed that the seams are a bit wider than non HD trucks or our NBS models.

I took it to a custom hot rod shop and chatted with the owner. We looked at the fender to door gap and fender to bumper and grille gaps. Everything was lined up as good as they lined up for the NBS and we all know that they are not super tight to begin with all around the truck.

He said sure we could ram on the fenders and maybe ream out and epoxy some new holes for the fenders or hinges, if I really wanted to go that absolute with fitment, but then you risk misalignment of the doors, etc...

In his eyes, he said, this isn't that bad. If you can deal with what only those who know about this mod would care about and knowing that the average Joe would never notice then roll with it.

I still would't ditch it for a small imperfection on a unicorn mod. My .02.
 

ComputerJAM

TYF Newbie
Joined
Jun 12, 2022
Posts
3
Reaction score
1
Does anyone know if a swap back and forth is possible? As in, would my Suburban hood fit back onto the HD pickup?

There are a couple HD trucks near me, and i would like to offer to swap hoods (with cash added), if this will work.
 
Last edited:

O3YUKONXL

Full Access Member
Joined
May 18, 2009
Posts
111
Reaction score
19
Failed searches for white Yukons with H/D hoods. Any pics out there?
 

Tonyrodz

Resident Resident
Joined
Feb 16, 2012
Posts
30,958
Reaction score
45,061
Location
Central Jersey
Kind of.
 

Attachments

  • 23862-1412364702-cc8ee56d464e34d355003e6fcae9634f.jpg
    23862-1412364702-cc8ee56d464e34d355003e6fcae9634f.jpg
    39.3 KB · Views: 10
  • 23863-1412364811-4f7763a5fd2d9328ac87caa8d0da0bd4.jpg
    23863-1412364811-4f7763a5fd2d9328ac87caa8d0da0bd4.jpg
    49.4 KB · Views: 10
  • 23868-1412364882-85c02763757c488115a74c065c34a01c.jpg
    23868-1412364882-85c02763757c488115a74c065c34a01c.jpg
    44.9 KB · Views: 12

Forum statistics

Threads
128,806
Posts
1,805,680
Members
91,786
Latest member
Fitransmission
Top