2007chevy5.3l
Member
Belltech 2in spindles up front and 4in springs w/1in spacer in the rear
Enjoy!
Enjoy!
Got her dropped (pics)
- Thread starter 2007chevy5.3l
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
sumo
dn ʇǝƃ ʇuɐɔ & llǝɟ ı
Looks good, whats next? Rims?
OP
OP
2007chevy5.3l
Member
No rims. Built transmission and a tsp220 cam
OP
OP
2007chevy5.3l
Member
- Joined
- Jun 9, 2009
- Posts
- 8,744
- Reaction score
- 605
id get something different than that tsp220 cam. been down this road a few tims on customers trucks
id start off with
yank ptb3600 converter
4.10 gears
intake
tune
pacesetter long tubes
OP
OP
2007chevy5.3l
Member
I already have a 3200 stall, intake and efilive tuning by myself. I chose the tsp220 cam because its still mild. It will be on a 110lsa to bring the power band down a little to help with the lack of gearing and 31in tall tires. I dont want 4.10s cause I do highway pulls and right now with the stock cam 4.10s would really hurt me. Ive been a member over on pt.net for a long time and have decided on that cam.. What was your experiences?
- Joined
- Jun 9, 2009
- Posts
- 8,744
- Reaction score
- 605
Im in san francisco and the yank 3600 by far is very streetable.
4.10s with your truck on 31 inch tall tires you can get 130 still and you will be fine. Not sure how fast you want to go on your truck. with a yank 3200 to a yank 3600 i got from a 13.49 to a 13.18 on a customers truck and he said felt just as tight.
3.42s on those tahoes just just to small for me. 3.73 or 4.10s all the way
oh yah same truck on a 100 shot ran a 12.20 full weight i set him up with m&H racemasters 325 45 17 for the rear with a 28 inch tall tire thing hooked and was great. i dialed in the suspension got consistant 1.7s not even spraying before the 60 foot mark.
my tbss runs 7.20s in the 1/8 and 11.30s-11.40s consistant and my wife drives it daily with a yank 3600 converter.
Either way good luck with your combo looking forward to seeing what it runs.
4.10s with your truck on 31 inch tall tires you can get 130 still and you will be fine. Not sure how fast you want to go on your truck. with a yank 3200 to a yank 3600 i got from a 13.49 to a 13.18 on a customers truck and he said felt just as tight.
3.42s on those tahoes just just to small for me. 3.73 or 4.10s all the way
oh yah same truck on a 100 shot ran a 12.20 full weight i set him up with m&H racemasters 325 45 17 for the rear with a 28 inch tall tire thing hooked and was great. i dialed in the suspension got consistant 1.7s not even spraying before the 60 foot mark.
my tbss runs 7.20s in the 1/8 and 11.30s-11.40s consistant and my wife drives it daily with a yank 3600 converter.
Either way good luck with your combo looking forward to seeing what it runs.
OP
OP
2007chevy5.3l
Member
Do you have a link to the build thread on that truck? Or any videos? Sounds like a fun build!
- Joined
- Jun 9, 2009
- Posts
- 8,744
- Reaction score
- 605
I did all the stuff here. ill try to see if he can come on here. Due to what happened to me last year I don't post up people rides unless they give me permission. Don't need to be under the cops thumbs again.
