Gear selector indicator dim

[sunrisor]

I am new to this forum, and my first post, so here goes:
I've read several threads about replacing lamps in the cluster for gauges, switches, dome lights, etc. but the gear selector area is dim, and almost unreadable. I don't think the LED replacement thing will help this...or will it?

Sorry, ..'03 Yukon XL had the cluster replaced under warranty 5 years ago for burned out lamps that were missed during their inspection.

 

[chauncey0337]

Welcome! No, the led replacement will not fix your issue. You might have to get a whole new cluster or have that part serviced if possible.

 

[sunrisor]

Thanks, I figured as much, nothing is ever simple.

I may do the led conversion though, I saw some pics on here and it looks cool, the wife likes it too (since she drives it most).

 

[OmarR]

Its a resistor that needs to be re-soldered.

 

[sunrisor]

Thanks!! Any way you can point out which one? or will I notice it when I pull the cluster out..?

 

[Tonyrodz]

I have the same problem in my 03!

 

[OmarR]

http://www.silveradoss.com/forums/topic/62576-dim-or-dark-prnd21-fix/

 

[sunrisor]

WOW! just saved me hundreds!...thanks! Going to do that when I change to LED's

 

[OmarR]

No prob!

 

[Jeeptoy91]

Tried that

Tried to do the resistor re-solder repair and it didn't work for me. I re-soldered it three times. Even tried to remove old solder and re-install new solder.

 

[jericho121]

good to know gonna try these on my 05 yukon

 

[707Tahoe]

Thanks for the info! Jus did it while doing my LED conversion and it worked out. Was getting worried my whole cluster was going bad for a sec