Ebay reverse camera install write-up

[5301113]

Good write up! Might have to do this mod in the future!

 

[BillBlatt18]

what did you do with the traction control toggle? and you have a link fo rthe cam?

 

[2005yukonxl]

05 nali, look in my other threads on our camera...the TC button just pops out of that plastic piece, leaving a nice square box. wires are perfect length to reroute to the glove box and just double stick tape the button into that section of the glove box on the left thats divided. cubbycam's website has the picture. here i googled it for you to save some time

and if u want specifics on my camera install, look for my newbie here thread where i posted all of our mods. i used an ebay camera on mine and total cost was like 50 bucks for camera and monitor.

 

[BillBlatt18]

thanks, i have since moved my tc toggle there to add a cubby hole instead of the plastic there. So now i just need to find a monitor that will fit in there nice and snug and look decent. I am ready to pull the trigger on this finally and just need to find a monitor

 

[BillBlatt18]

bump

 

[jmyler]

Great write up. One question. Did you just wire the camera and the monitor to the same place? I couldn't really tell. If so does the camera come on when you unlock the doors and the reverse lights come on? How did you get around this? if at all?

 

[FLDataTeK]

Thanks for the writeup dropmech.. i just bought one from ebay.

I know this is a old thread but if anyone is looking for this setup there is a guy selling a few on ebay. I bought one and it says he has 2 left. and they are only $33.95 with shipping

http://www.ebay.com/itm/271160205935?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649

 

[dropmech]

Thanks for the writeup dropmech.. i just bought one from ebay.

I know this is a old thread but if anyone is looking for this setup there is a guy selling a few on ebay. I bought one and it says he has 2 left. and they are only $33.95 with shipping

http://www.ebay.com/itm/271160205935?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649

You got it bud! Good luck with it. I haven't had a single issue with mine from day one.

 

[FishinCricket]

Damn, looks like I missed out

 

[FLDataTeK]

Damn, looks like I missed out

Yep looks like they are gone already..

 

[605Jake123]

There is another listing for the same thing here is the link:

http://www.ebay.com/itm/1-New-Intergrated-Back-Up-Camera-System-In-Dash-Mount-3-5-GM-GMC-CHEVROLET-/271162463017?_trksid=p2047675.m1850&_trkparms=aid%3D222002%26algo%3DSIC.FIT%26ao%3D1%26asc%3D11%26meid%3D5850660331095580877%26pid%3D100011%26prg%3D1005%26rk%3D1%26sd%3D271160205935%26

 

[FLDataTeK]

Yep... Looks like he had two but one has already been sold so you better jump fast....

 

[FishinCricket]

Yep... Looks like he had two but one has already been sold so you better jump fast....

Done!!

 

[FishinCricket]

And now there's more of em listed:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=271162959457

 

[605Jake123]

For those that have installed these. how do they perform at night and do they have the depth lines that i have seen on some of the other options?

 

[FLDataTeK]

Looks like he put up more...

http://www.ebay.com/itm/1-New-Inter...ash-Mount-3-5-GM-GMC-CHEVROLET-/281071138137?

 

[FishinCricket]

Just received mine, will post when it's installed!

 

[605Jake123]

got mine installed yesterday just like how the OP did it. Working great so far, there was barely enough wire to get to the front. I actually had to reroute it to get it to stretch and then it was still barely enough.

 

[txhoe]

what do you guys think about mounting a camera were the button for the rear window is

 

[FishinCricket]

got mine installed yesterday just like how the OP did it. Working great so far, there was barely enough wire to get to the front. I actually had to reroute it to get it to stretch and then it was still barely enough.

Where'd you route it?