Complete Lighting/LED List

[haks310]

The rear passenger doors were really easy, fronts were a bit harder. If you take your time and don't rush it then you'll be golden.

 

[Billy_ocean04]

Got a question. With the 3157 on vleds. Did you get all standard bulbs?

 

[970Tahoe]

The rear passenger doors were really easy, fronts were a bit harder. If you take your time and don't rush it then you'll be golden.

Plug and play or solder?

 

[haks310]

I'm running LED tail lights so no 3157 bulbs for me. But on the stock tail lights you will need a regular 3157 LED for the top socket, a 3157 SRCK LED for the middle socket.

Door switches are plug and play.

 

[NefariousAutoCustoms]

Thanks for list. LEDs are the biggest in the lighting market now.I work for a wholesale company in Houston and we are selling tons of these to car clubs/shops/etc. Thanks once again. I just put the dual color turn signals in and looks nice. Check out the videos here. www.myspace.com/nefariousautocustoms and look under the videos area

 

[Brandon X]

Are the door lights easy to install? I'm worried about breaking the plastic to get to them and don't wanna mess that up.

Also, I want to replace the blinker indicators, is that just a T1.5 twist lock LED? Thinking about making those white or red.

 

[haks310]

Door lights are easy, just use a flat head screw driver to pop them off.

Indicators are T1.5. But whether you do white or red LEDs they will still be green. You can do it, but it will be a lot of work.

 

[Brandon X]

Door lights are easy, just use a flat head screw driver to pop them off.

Indicators are T1.5. But whether you do white or red LEDs they will still be green. You can do it, but it will be a lot of work.

Damn they'll still be green? That's disappointing. Thanks for the help im glad you told me that before I went and bought em.

 

[haks310]

Yeah. All the bulbs in the dash are white. The reason the indicators are green, red, etc, is because there is a colored film (green, red, etc.) behind the gauges.

 

[Billy_ocean04]

Wich led taillight housings do you have and were they expensive? I want to buy a set but I don't want the cheap stuff but I also don't want to spend 300 dollars on them either. I've seen some out there that run about that much and as cheap as 105 on eBay

 

[haks310]

$155 shipped of ebay.

Can't tell you what seller, I do remember that the brand is "eagle eye".

I've ran them for about a month without problems. Fit was also really good, not OEM, but good for aftermarket.

 

[Brandon X]

Just order 4 more red 194's. I got the 90 degree viewing angle, I hope that's ok. Also ordered some white overlay gauges for my cluster, HVAC & light controls. Interior LED's are now complete. Thanks for all the help and info haks.

 

[Rucksak19]

2007-2010 GMC Yukon / Yukon Denali

Bulb List / Cross Reference

Exterior:

Headlight = H13
Fog light = H16 & H13
Sidemarker amber = 194
Turn signal amber = 3157
Puddle lights mirror = 194
Lisence plate = 194
Brake / Tail = 7443
Reverse = 7440

Interior:

Dome light (44mm) = 6418
Vanity light (31 x 5mm) = 3021

All bulbs can be purchased online at

www.autolumination.com

 

[txhoescrapin]

The 194's for the cluster, ashtray etc. are the t10???? I am lost here.

 

[haks310]

T10 is just a another name for 194s...194 is more common though.

 

[99Yukon_Z71]

I went ahead and bought the white WLEDS for my cluster and A/C controls and they actually look like a light purple/bluish hue to them. I thought they were packaged wrong but both the t1.5's and the WLEDS are the same color. Not that they look bad, just was expecting WHITE and not purple!! lol just a little FYI there guys!!

 

[Billy_ocean04]

I got the blue ones. Haven't put them in yet though. I think I want white now. I don't want a really deep blue. But I'll try them out and see how I like them

 

[roadrageror]

just found this thread again...really want to do an int LED swap..just ordered all my LEDs for my ext on 99denali. GREAT thread HAKS!

 

[haks310]

Thank you!

/bump

 

[TheBigler]

hey what color white did you use for these on the inside?