Kon-Man
TYF Newbie
Thanks Buddy!!!!!
Complete Lighting/LED List
- Thread starter haks310
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
That fucken sucks.....makes me feel better about just breaking one tab on mine though lol.
Overhead console is two peices. The whole assembly is held up by one screw up front...by the rearview mirror. After that there is about 12 more screws that hold the two peices together.
Overhead console is two peices. The whole assembly is held up by one screw up front...by the rearview mirror. After that there is about 12 more screws that hold the two peices together.
Atomic, I will def. trade you mine if your interested. I was planning on going to the junk yard to get a new one. Does anyone know if these units go bad and pulling one from a junk yard wouldn't be wise?
Haks, thanks for the info, i'll try and find that screw tonight in the overhead console.
I was looking at the hatch and rear wiper switches too and don't think they ever lit up. Someone correct me if i'm wrong, but the lettering on them is on a solid, no transparent, background.
Haks, thanks for the info, i'll try and find that screw tonight in the overhead console.
I was looking at the hatch and rear wiper switches too and don't think they ever lit up. Someone correct me if i'm wrong, but the lettering on them is on a solid, no transparent, background.
AtomicHoe094
Atomichoe094
The fog button deff lights up bcuz mine is right now. im not sure on the other ones. maybe not tradddeee persay. i like my clips, but i was just throwing it out there, i wasnt going to do the double din thing like tomorrow or anything. im gunna do it once i get 50percent off alpine and shit. in school....
Its hard to find them at junkyards, but have have you got to lose? just make sure it has 2 tabs
blackcoffee
O.G. Black.
- Joined
- Aug 17, 2009
- Posts
- 1,292
- Reaction score
- 6
Will any 194 bulb fit, like on V-LED there's a 2 V-LEDS BLUE 27 SMT LIGHT BULBS 194 168 158 2821 for $18 would that pair fit? And also, the autotrac push button 4wd theres different selections on that so 4 different lights, what led bulbs would they be?
This is what I used blackcoffee:
http://www.v-leds.com/Exterior-LED/...ED/2-SUPER-BLUE-6-LED-LIGHT-p4481077-1-2.html
http://www.v-leds.com/Exterior-LED/...ED/2-SUPER-BLUE-6-LED-LIGHT-p4481077-1-2.html
I've been using this thread to convert my exterior lights to leds but I've been throw a curveball. V-leds says to use these SRCK 3157 for my center tail light but to use the regular 3157 for the top light. Im not sure if the regular will work because it shows a close-up of the connector and there is only one ground. Anyone know what the deal is? Oh, and of course these bulbs are out of stock! Here's the link: http://www.v-leds.com/Exterior-LED/Brake-Light-LED/Red-LED/V-LEDS-RED-SPECIAL-TAILBRAKE-p5168711.html
How do you get the map lights out of the front overhead console. They don't push in and turn like the other map lights.
for reference: http://cgi.ebay.com/ebaymotors/99-1...ptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories
for reference: http://cgi.ebay.com/ebaymotors/99-1...ptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories
Also, for the guys that have done their AC controls; if you had to do it again, would you spend the extra money and get the "high power" models or just stick to the regular ones superbrightleds.com sells.
regular vs high power: http://www.superbrightleds.com/cgi-bin/store/commerce.cgi
regular vs high power: http://www.superbrightleds.com/cgi-bin/store/commerce.cgi
I do notthink the regular 3157 will work. Believe they were having problems with the LEDs getting fried, that is why they came out with these new SRCK bulbs. Has been a problem with other places that make LEDs also.
I had to take down the whole upper console to get to the map lights, don't know if there is an easier way. I's stick with the regular LEDs for the HVAC...I probably would have gone with the high powered ones if they had them when I bought mine. Then again I sometimes over do it with the lights lol
I had to take down the whole upper console to get to the map lights, don't know if there is an easier way. I's stick with the regular LEDs for the HVAC...I probably would have gone with the high powered ones if they had them when I bought mine. Then again I sometimes over do it with the lights lol
titanium02
w7's or bust.
Tag.
Well, I finally got a chance to take my overhead console down and tear into the rear HVAC controls. They are definitely NOT 194’s but do look a lot like them and are a wedge type bulb. If anyone could look at the pictures below and help me out as to what size bulb these are I’d be very appreciative. As soon as I get these identified I’ll be ordering the last batch of LED’s to finish off the job.
