Cam swap

Discussion in 'Performance' started by Mike baker, May 22, 2019.

Sponsored By: Black Bear Performance
  1. Mike baker

    Mike baker TYF Newbie

    Posts:
    8
    Likes Received:
    1
    Joined:
    Mar 16, 2019
    Location:
    Tennessee
    Name:
    Michael
    This is my 01 Tahoe it is 6.0 swapped I'm going to be putting a btr stage 2 cam in it how do I get it tuned after or will it run without a tuned

    FB_IMG_1558131137326.jpg
     
  2. Tonyrodz

    Tonyrodz Resident resident

    Posts:
    13,790
    Likes Received:
    12,671
    Joined:
    Feb 16, 2012
    Location:
    Central Jersey
    Name:
    Tony
    Def need to get a tune. Might not run right, or to its fullest potential without a tune, plus I bet your cel will be lit with alot of codes. I did a 6.0 with a stage 3 cam and stall tq conv. Tune was done right there, and it runs great. Check out my build thread down below in my sig.
     
    Onebad1983, Dcmaynor and Doubeleive like this.
  3. CJ Rodarme

    CJ Rodarme Full Access Member

    Posts:
    184
    Likes Received:
    93
    Joined:
    Mar 12, 2018
    Location:
    Kent, WA
    Name:
    CJ
    You will definitely need to get it tuned, you can either get it dyno tuned or send your ECU out to get flashed
     

Share This Page