Bi-Color LED Switchback Turn Signal DRLs

[blkonblk]

has anyone done this? check this video out the drls and the turning signal both turn on at the same time
http://www.youtube.com/watch?v=sWsDhdnb-70&list=UUJ6dk4s-8JcjIQf3tTTgWbw&index=6&feature=plcp

thinking about ordering these and doing it, if someone can help it will be appreciate it: http://www.ebay.com/itm/Diamond-Bac...Parts_Accessories&hash=item2c6380c135&vxp=mtr

 

[NathanJax]

If I'm not mistaking, that's Serges old tahoe and light setup...


Yup. It's Serge's (Soulsea) old tahoe. Those are v-led switchback drl/blinkers: V-LEDS TYPE 1 DUAL COLOR CHANGING HID WHITE AMBER SWITCHBACK 60 M-SMT TURN SIGNAL BULBS 3157


more info here: http://tahoeyukonforum.com/forum/showthread.php?t=29620

 

[OHSIXX]

I believe it is too. Just another beautiful modded SUV from Serge Why did he get rid of that one again?? That Hybrid was stunning......

 

[GalaxyBlackEsky]

Because the guy changes his mind more then kids voice during puberty...

 

[soulsea]

That was a perty truck.

Bo, those are v-led switchback leds ... let me see if I can track down a link for you.

---------- Post added at 12:33 PM ---------- Previous post was at 12:18 PM ----------

Well they are sold out of the ones I used on that truck, but if you go to v-leds, click on 3157 > switchbacks, they have a few options available ... you'll also need to get resistors.

Don't sk me how they were wired, someone did that for me.

 

[blkonblk]

thanks everyone for chipin in

i should've known someone from here moded that hoe,,,only the best in here

Serge - cant believe it was your truck, great set up

actually the wiring is what i was interested in lol,,

anyone here knows how to wire these things??? a diagram would be a lot of help

 

[NathanJax]

anyone here knows how to wire these things??? a diagram would be a lot of help

best thing to do would be talk to the shop that did it... can't hurt to ask...

 

[soulsea]

Bjorn at customlightz is unlikely to respond ... he's uber busy these days.

But basically you need to connect both the drl and ts signals to each bulb with a resistor in the path. TYF member sumo has slightly similar setup, perhaps he can chime in and tell you how to wire them.

 

[blkonblk]

Bjorn at customlightz is unlikely to respond ... he's uber busy these days.

But basically you need to connect both the drl and ts signals to each bulb with a resistor in the path. TYF member sumo has slightly similar setup, perhaps he can chime in and tell you how to wire them.

thnx Serge, i'm shoot Sumo a pm

 

[RollTide2]

Did you ever find out? I want to do this too.