2016 Z71 Tahoe 2" level on 285/55r20

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Jareth Todd

TYF Newbie
Joined
Dec 30, 2015
Posts
18
Reaction score
18
image.jpeg
image.jpeg
2" front level
20x9 Fuel Maverick
285/55r20 Toyo R/T
 

2016YUKONSLT

Full Access Member
Joined
May 24, 2016
Posts
245
Reaction score
60
Looks Good. Laura Buick just had a white Yukon with these same rims, but with 305/55r20.
 
OP
OP
Jareth Todd

Jareth Todd

TYF Newbie
Joined
Dec 30, 2015
Posts
18
Reaction score
18
I think that's just how the angle looks in the picture. In person it looks to be completely level. Maybe a 1/4" higher in the back.
 

Illnasty

Full Access Member
Joined
May 29, 2016
Posts
339
Reaction score
170
Location
New Jersey
I'm thinking about leveling mine out as well. Is it just a preference to either drop the back or lift the front? I would think lifting the front would be better so I get some more ground clearance.
 

Denton

Full Access Member
Joined
Nov 22, 2010
Posts
113
Reaction score
45
Location
Waco, Texas
Good, so if a 305/55 will work, then a 285/60 should as well. (33.2" vs 33.4")
 

Denton

Full Access Member
Joined
Nov 22, 2010
Posts
113
Reaction score
45
Location
Waco, Texas
My 305/55 have a slight rub at full lock in reverse, but since the 285 would be skinnier they might work...
Looks good, I am torn between a 305/55/R20 Mickey Thompson or the 285/60R20 Goodyear Duratrac. I got 63k miles and still going on my Mickeys, so I am partial to them but they dont make the 285/60r20 and only can find a Duratac in that size. Decisions, Decisions..........
 

Denton

Full Access Member
Joined
Nov 22, 2010
Posts
113
Reaction score
45
Location
Waco, Texas
Yep, 305/55r20 2.25" ProComp Leveling Kit

View attachment 65818

Do you think a 275/60R20 would fit with your setup? I have your exact vehicle, You have a 2.25" leveling kit, I am installing a 2.5" leveling kit. I am trying to stay with Mickey Thompsons, and wondering if a tire .7" taller, two inches narrower than yours, would fit? Any thoughts?
 

mowrer7

Member
Joined
May 11, 2011
Posts
44
Reaction score
8
Location
Southern Illinois
Do you think a 275/60R20 would fit with your setup? I have your exact vehicle, You have a 2.25" leveling kit, I am installing a 2.5" leveling kit. I am trying to stay with Mickey Thompsons, and wondering if a tire .7" taller, two inches narrower than yours, would fit? Any thoughts?
Do you think a 275/60R20 would fit with your setup? I have your exact vehicle, You have a 2.25" leveling kit, I am installing a 2.5" leveling kit. I am trying to stay with Mickey Thompsons, and wondering if a tire .7" taller, two inches narrower than yours, would fit? Any thoughts?

A 275 should definitely fit as it is shorter by .2" as for the 285 I believe it would fit with the same rubbing I have now. Let us know how it turns out.

Screenshot_2016-08-25-09-30-20.png Screenshot_2016-08-25-09-31-03.png
 
OP
OP
Jareth Todd

Jareth Todd

TYF Newbie
Joined
Dec 30, 2015
Posts
18
Reaction score
18
I am looking at installing this exact wheel and tire combo. I am coming from factory 22" rims. How is the ride on Toyo's. I am debating the Toyo's vs the new BFG's. Thanks
The RT isnt as quiet as people have said. Unless you just want the aggressive look of the MT or RT go with the AT2. The ride with the RT is smooth not rough at all. Not a loud roar but they do hum a good a bit. Ive used Toyo's for awhile and from my experience I won't use another brand. Best out there in my opinion.
 

whitlecj

TYF Newbie
Joined
Jan 12, 2016
Posts
24
Reaction score
11
The RT isnt as quiet as people have said. Unless you just want the aggressive look of the MT or RT go with the AT2. The ride with the RT is smooth not rough at all. Not a loud roar but they do hum a good a bit. Ive used Toyo's for awhile and from my experience I won't use another brand. Best out there in my opinion.
Thanks!
 

BradzTahoeStuff

TYF Newbie
Joined
Aug 21, 2016
Posts
11
Reaction score
1
A 275 should definitely fit as it is shorter by .2" as for the 285 I believe it would fit with the same rubbing I have now. Let us know how it turns out.

View attachment 65924 View attachment 65925


During the leveling process, did you get any feedback about kits that level from the top or bottom or both? Some kits seem to level by adjusting at the top of the strut, others level by adding a bit at the top and the bottom of the strut. Does it matter much? Any significant difference in performance or stress on the CV joint and shaft?

I could be way over thinking this, but it did catch my attention.

Thoughts?
 

Forum statistics

Threads
137,784
Posts
1,992,223
Members
102,778
Latest member
NjA4207

Latest posts

Back
Top