Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Thanks!Ignition switches are known to go bad in these trucks.
Thanks!Several typical things come to mind (these are more common than ignition switch issues).
Fuel pressure leaking down (fuel pump issue; check KOEO fuel pressure before cranking)
Crankshaft sensor not sync'd (a CASE relearn with a capable scanner corrects this)
An easy test you can run is to turn the ignition key on (not to Start), then off, then on several times. Then try to crank it. That builds fuel pressure before cranking.