2"3" drop ?

[Cobra]

All I want to know from the guys with a 2" and 3" drop is. Will doing this drop effect my Tahoes exhaust location? Is it going to have to move or is it possible to stay in place without issue? I'm thinking of maybe doing this drop this summer but I want to know what issues or corrections I may need to take if I decide to do this.

 

[sschrader]

No issue with exhaust at all, 3" or 5" drop.

 

[SloZ71Hoe]

i have full 3" and a 3.5" tail pipe and never had a problem.

 

[Max]

Depends on how they route it but I have no issues with a 5" drop and 3" pipe over the rear axle.

 

[Cobra]

Sounds good! Thx Guys. I am starting to dislike the wheel gap I have. Currently I sit 37 1/4" center edge of wheel well rear and 36 1/2" Front wheel well edge. DOes anyone know off hand where they sit with a 2-3 Drop. I know I assume 2 and 3 inches lower but I want to know what height are they really rolling at.

 

[fatnlowtahoe504]

when i had the 3/5 and dual exhaust the axle hit my pipe that crossed over to the driver side, so when i bagged it i got exhaust going only out the passenger side...

---------- Post added at 10:35 PM ---------- Previous post was at 10:34 PM ----------

2/3 should have no issues

 

[Cobra]

when i had the 3/5 and dual exhaust the axle hit my pipe that crossed over to the driver side, so when i bagged it i got exhaust going only out the passenger side...

---------- Post added at 10:35 PM ---------- Previous post was at 10:34 PM ----------

2/3 should have no issues

Cool. Sounding good. Thx for the info.

 

[blueflamed03]

same here, 2/3 and no change in location.