05Single's virgin build thread. 03 tahoe

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

PG01

Elite Member
Supporting Member
Joined
Nov 6, 2016
Posts
15,676
Reaction score
21,079
Location
Up here to the right
Which rust transformer?
I used the rusty-oleum and locktite stuff from homo depot on my trailer years ago. Both are pretty similar....Dries to a flat black then you can top coat it. Not bad stuff and its held up very well.
2904EEB9-2368-4449-B63F-876D3A31FEBD.png
68577ED7-AA5A-4ED0-8782-7848F294A95C.png
 
OP
OP
05Single

05Single

afraid of the dark
Joined
Feb 26, 2015
Posts
8,243
Reaction score
11,639
Front end looks really good, especially with the front bumper color matched. How'd you do the bumper again? Rattle canned it? I forgot.
All parts I paint are rattle canned. holding up pretty good. There’s some chips on the front bumper I need to fill in, then I’ll put a clear bra over it. Just not avoidable here:nolol:

And yep I used the rust-oleum rust reformer, same as the one @Galante posted.
 
OP
OP
05Single

05Single

afraid of the dark
Joined
Feb 26, 2015
Posts
8,243
Reaction score
11,639
A clean engine bay is a happy engine bay!:party36:

Haven’t deep cleaned the bay in a couple years so I decided bring it back to life. Simple green (or degreaser of your choice) then rinse. When it’s still a little wet from the rinse then soak it down with armor all (or shine of your choice) and let sit for 30 minutes. Then wipe the excess off. Also finished debadging the engine components, took stickers off air box, maf, and ps fluid reservoir.
B068E893-924E-4E22-9B0A-05476618E2AF.jpeg
4DC40573-38AF-4B07-B057-B99725EC674C.jpeg
02DE3E75-0110-4791-826F-E9AA21FB675D.jpeg
1AF91272-5D4D-4FF9-99AF-577206DBC1A3.jpeg
 
OP
OP
05Single

05Single

afraid of the dark
Joined
Feb 26, 2015
Posts
8,243
Reaction score
11,639
All of my center caps have dents. This cap was the worst one. Upon closer inspection I noticed it’s an aluminum cover over the plastic center cap and that they can be separated. So I pried the tabs and separated them to try and work the dents out and try to make the aluminum look smooth again.
5BE54B0B-7F58-4878-8FBA-624AC98354FA.jpeg
FE379E74-F38D-40AD-BDE4-2F8C7508D6C6.jpeg
B0E61F18-D91B-4664-BDD8-5D3DA3CB31E6.jpeg
D2BE44F9-F7C1-4C74-A5E6-4196B67AE409.jpeg
BE46ACEE-E56C-4F34-B9E1-42092764FC11.jpeg
 

Tonyrodz

Resident Resident
Joined
Feb 16, 2012
Posts
33,178
Reaction score
51,386
Location
Central Jersey
A clean engine bay is a happy engine bay!:party36:

Haven’t deep cleaned the bay in a couple years so I decided bring it back to life. Simple green (or degreaser of your choice) then rinse. When it’s still a little wet from the rinse then soak it down with armor all (or shine of your choice) and let sit for 30 minutes. Then wipe the excess off. Also finished debadging the engine components, took stickers off air box, maf, and ps fluid reservoir.View attachment 221927 View attachment 221928 View attachment 221929 View attachment 221930
Looks really good. Kind of reminds me of Star Trek for some reason lol.
 

Rocket Man

Mark
Supporting Member
Joined
Dec 25, 2014
Posts
26,678
Reaction score
52,943
Location
Oregon
A clean engine bay is a happy engine bay!:party36:

Haven’t deep cleaned the bay in a couple years so I decided bring it back to life. Simple green (or degreaser of your choice) then rinse. When it’s still a little wet from the rinse then soak it down with armor all (or shine of your choice) and let sit for 30 minutes. Then wipe the excess off. Also finished debadging the engine components, took stickers off air box, maf, and ps fluid reservoir.View attachment 221927 View attachment 221928 View attachment 221929 View attachment 221930
Now that’s a clean engine. I need to do mine.
 
OP
OP
05Single

05Single

afraid of the dark
Joined
Feb 26, 2015
Posts
8,243
Reaction score
11,639
Tried out some cheap static cling tint. Figure for $13 for a roll and it’s just the rear windows it should work good. It was easy to install but pretty hazy. For install it says to use their application spray but another option is baby shampoo. I planned on getting real tint this summer anyway, but now I have an idea of how it will look and how dark it will be with 5% over he factory 20%
F643DFA6-7950-414C-90D0-6AA567062AEC.jpeg
795F8C9F-02D5-4216-BB2E-AB964CF5AB60.jpeg
B8243AF2-D6FC-4241-89A4-D4351F7FFFF0.jpeg
A3FFC922-2C45-4A8B-8945-084AC0D87448.jpeg
2D1A672E-7571-4DC6-8115-0987EF863F6E.jpeg
 

Forum statistics

Threads
137,717
Posts
1,990,314
Members
102,709
Latest member
SuburbanPassion95
Back
Top