03 Tahoe shocks

[Robert S Snipes]

Hey everyone new to the Tahoe world. Need some help with a 2003 Tahoe 5.3 Flex 4wd. I’m going to start on the Bilstein b6 4600 rear conversion kit that I just got from rock auto. I just opened it up and I’m needing all of the hardware (wasn’t included) I’m hoping not to reuse the old hardware and was hoping someone knew the bolt sizes and what washers I might need? Also I’m really not trying to take it off and then go to the store and match them up but if that what it come to then I will. Thanks in advance everyone.

 

[Big Mama]

I’m like you take out and replace without stopping but That’s probably your best option here’s a kit I found

https://www.summitracing.com/parts/...MIiOe8s-Dk4wIVhp-fCh3hYQ3nEAQYBiABEgK-OPD_BwE

 

[Robert S Snipes]

I’m like you take out and replace without stopping but That’s probably your best option here’s a kit I found

https://www.summitracing.com/parts/...MIiOe8s-Dk4wIVhp-fCh3hYQ3nEAQYBiABEgK-OPD_BwE

Thanks for the response. I’m just going to take out and probably reuse the bolts if I can if not then I’ll just be SOL until I can get some new hardware. Wish me luck.

 

[Big Mama]

No worries man if they’re not rusted or getting a funky new angle or load I’m sure you’re ok