Oshkosh
Full Access Member
On my 00 yukon xl 1500 4wd, converting the rear self leveling setup to Z71 coils and Bilstein 5100 shocks.Maybe with 3/4" coil spacers?
My question is with the Bilstein's did people who've done this get the 0-1" lift or the 3" lift shocks?
It seems like the height difference of the z71 coils varied a lot per application depending on how sagged our stock setup was.
I've replaced front keys with 1.5" leveling keys and 5100's, it is about 1.5" nose high now not cranked up.
Ordered 1" flat top urethane bump stops,to install under the Z71 jounce bumpers to get those working again.
http://www.prothanesuspensionparts.com/9.9117
My question is with the Bilstein's did people who've done this get the 0-1" lift or the 3" lift shocks?
It seems like the height difference of the z71 coils varied a lot per application depending on how sagged our stock setup was.
I've replaced front keys with 1.5" leveling keys and 5100's, it is about 1.5" nose high now not cranked up.
Ordered 1" flat top urethane bump stops,to install under the Z71 jounce bumpers to get those working again.
http://www.prothanesuspensionparts.com/9.9117