Front Dash Crack

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

mentalattica

Member
Joined
Oct 19, 2010
Posts
61
Reaction score
15
After sending Jennifer a request, I finally got a call from Tawanda (sp?) from GM Customer Service 5 days later (after reminding Jennifer that no one contacted me in the said 2 days). As usual, all of my experiences with GM Customer Service are about as pleasant as getting a colonoscopy, at the same time as a root canal while listening to the Best of Mili Vanilli.

Tawanda told me "There's nothing tied to your VIN that would indicate that this is a problem." I tried explaining that it's extremely common in GMT900s, referenced this thread, and other online sources. She wasn't remotely interested in visiting this thread (though I did link to it in my email I sent Jennifer T.). I would've thought with the power of social media Companies would be more interested in what people are saying online. Apparently not.

So she offered to set up an appointment at a dealer for me to go have it fixed and all I'd have to do is pay a diagnostic fee, ALONG with paying for the entire repair. I told her I'm not interested in paying to have it replaced because of the frequency this happens to these trucks (and I can do it myself for 1/5th of the cost). Long story short, she called the dealership to see if this is a problem they have any documentation on, called me back and said if this was a widespread problem it would be attached to my VIN and since they have no record of it there is nothing they would do short of having me pay them to replace it. Pretty unhelpful.

I got a laugh out of her asking if I've taken it to the dealer to have it diagnosed! I can see the service dept. now, "What you have is a cracked dash. That'll be $96.00."
 

mentalattica

Member
Joined
Oct 19, 2010
Posts
61
Reaction score
15
Update:

I got a call from my local dealer today and they've agreed to replace the dash for $400. I'm not ecstatic, but all things considered, it's better than nothing. GMPartsDirect has the dash for $273 + about $70 shipping, so I think I'll bite the bullet and pay the $400. A $60 difference give or take to have the dealer do it. I would've been EXTREMELY happy at $200 or less.
 

Ahrgh

TYF Newbie
Joined
Jul 22, 2013
Posts
2
Reaction score
0
Stopped by dealer and asked them about it. Rep stated they will replace the dash for free and gave me a driver for the afternoon. Came back later and bada bing - new dash. Really happy with this dealership for comming through. 2011 Tahoe with 20K miles. Now I have to go back for the check engine light.....
 
Joined
May 7, 2009
Posts
82
Reaction score
0
Location
SC
Mine also, but because GM uses cheap parts, my 2000 Ws6 has a cracked dash, and door panels, and Im the original owner, its stays in the garage and has 40,110 miles on it...
 

tammybrant

TYF Newbie
Joined
Dec 8, 2013
Posts
4
Reaction score
0
dashboard crack

I have a few and called gmc of course they could care less and said to bad....getting worse and one is on airbag....they better hope to god something like that crack doesn't set the bag off....they wont be driving jaguars and Bentleys no longer!:flamingdevil:
 

jdl_131

TYF Newbie
Joined
Sep 6, 2011
Posts
12
Reaction score
0
add me to the list

anybody have a part number? I haven't been able to find it. Is this something i could repair myself or is it a huge pain?

one dealership guy told me that it is possible to have the crack repaired, anybody tried that?
 

strokinpower

Full Access Member
Joined
Apr 23, 2013
Posts
195
Reaction score
1
I don't have the part number but you can get it off GM parts direct for under $273.68. I just click body hardware and scroll down all the way and click view all parts diagrams and click the one with the dash on it and it's number 4 and whatever color you need.
 

Baysidebum

TYF Newbie
Joined
Aug 4, 2013
Posts
9
Reaction score
1
You can repair it yourself if you take your time. I posted the steps I went through to replace mine in another thread. The new dash, whether you order it online or at the dealer, will come in a pretty large box as they pack them pretty well. I can't imagine they can be repaired on the surface without cracking again. When I removed mine, the cracks traced all the way back to the mounting bolts on the instrument hump and near the airbag - makes me believe the entire issue began with over-torqued bolts. My new dash was identical in design to the old one, so it doesn't appear that any design changes were made.

---------- Post added at 07:24 PM ---------- Previous post was at 07:19 PM ----------

Read this thread for pics and basic instructions for dash replacement

http://www.tahoeyukonforum.com/forum/showthread.php?t=54372
 

Recon35

TYF Newbie
Joined
Jan 4, 2014
Posts
1
Reaction score
0
2011 Tahoe

I own a 2011 Tahoe and just found a giant crack with full separation of the dash in front of the steering wheel just like everyone else on these forums and on the youtube videos. I only have 48900 miles. It appears this is a well known issue. I called my local dealership and the service department said it was probably not covered!!!!! How is this well known issue not a recall? Are they trying to put one over me or is this really not covered? I have always taken really good care of my interior and to have this happen is not acceptable. Any suggestions on how to get this covered?
 

saif najd

Full Access Member
Joined
Dec 25, 2012
Posts
567
Reaction score
0
Hahahaha and and and they think people well buy there new look and they well drip over it!

Sorry this generation is or was your last chance to say "we care we fixed! "

Now I well never ever buy any new GM vehicle!

Man I visit the shops more than my doctor!!

Not everyone enjoyed this!

Oh yah and when I see GM truck customers running and visiting all spare parts shops asking for a part hahahaha man I think of them as homeless people!!

GM.. I don't know who runs you, but for sure he is to busy to run the business :D

If I would be asked to deliver one model! Only one! Yes I can make the flagship SUV cheep and Every one want it!!

I do feel sorry for this company.. failure after another (in my opinion)

Wow so busy..

Sent from my GT-I9505 using Tapatalk 2

---------- Post added at 08:33 AM ---------- Previous post was at 08:27 AM ----------

Sorry but what amazed me so far is that I had one small truck called Ford Ranger!

It lasted 13 years and yes I abused it as humanly possible and it was running great I sold it because I don't want it any more!!

This is Ford (family business) not GM (lets share the blame - actually it seems more like "I well blame you you blame him.. we survived this one!"

And you have the face to increase the prices haha haha haha haha haha wow just wow

Really? The Chinese dragon is on the way remember that at least

Sent from my GT-I9505 using Tapatalk 2
 
Last edited:

vickers1

TYF Newbie
Joined
Jan 8, 2014
Posts
2
Reaction score
0
GM definitely knows about the problems and has redesigned the dashes. If you get yours replaced, insist on the redesigned reinforced ones or you'll be in the same boat later.
 

Attachments

  • IMG_2702.jpg
    IMG_2702.jpg
    40.4 KB · Views: 75
  • IMG_2706.jpg
    IMG_2706.jpg
    40.8 KB · Views: 70

YukonCrazy

Full Access Member
Joined
Jun 13, 2013
Posts
349
Reaction score
46
Location
Raleigh, NC
The cracks on my 08 Yukon are growing and now starting to rattle. Has anyone taken on the task of replacing it on your own? I wonder how much time is required to accomplish that task.
 

saif najd

Full Access Member
Joined
Dec 25, 2012
Posts
567
Reaction score
0
GM definitely knows about the problems and has redesigned the dashes. If you get yours replaced, insist on the redesigned reinforced ones or you'll be in the same boat later.

It is not new! GM have this problem for around 16 years? Or maybe even more!!

For me GM is a lost call when it comes to new truck!

I don't feel the support!

How about you buy the Denali 2013 side step motor half price compared to the metal part which holds the side step!!! Electric part with sensors cheaper than few parts of metal only!!!

I have seen my good share, please don't think I am saying this out hate! No I am saying this because I am sick of the all new truck which end up with the same problems!
Not all dealer can or well get you the updated parts!!

If so .. don't you think GM should support all cracked dashs from 91?

A big manufacturer wants to make profits.. I do understand! But give something equal to how big you are not less!



Sent from my GT-I9505 using Tapatalk 2
 

YukonCrazy

Full Access Member
Joined
Jun 13, 2013
Posts
349
Reaction score
46
Location
Raleigh, NC
Just called my local dealer and was quoted a price of $216.30 for a new upper dash panel. I would hope it is the reinforced model, but will have to wait and see it up close. Now I need to find a tutorial on removing the old one. :confused:
 

Forum statistics

Threads
137,705
Posts
1,990,113
Members
102,699
Latest member
moto
Back
Top