Truck wont pass inspection - Texas

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

ballsie

Full Access Member
Joined
May 4, 2009
Posts
259
Reaction score
1
Location
austin texas
I went to have my truck inspected today and they came out and said dont bother.. it wont pass. Said i cant have ANY tint on my tail lights. I told him that the lights were brighter than any tail light in his parking lot. He said it doesnt matter - They wont pass. That they have to be red. With that in mind, i dont see how all those clear tail lights would pass. Does anyone know about this sort of thing? Here is a pic of my tail lights - They are LED and Bright as hell:
taillights%20003.jpg


Here is a pic with just the tail lights without the brakes:
taillights%20002.jpg
 

HMFDZ28

Full Access Member
Joined
May 25, 2009
Posts
306
Reaction score
4
Location
Hunt Sta, NY
soooo why not put the stockers in and get it inspected and then swap the others back in lol
 

Modded

That Guy
Joined
May 3, 2009
Posts
6,942
Reaction score
109
Hey man, I live in Texas and they're right. When I had blackeout tails (now have LEDs) I went by a local Kwik Kar and asked if I could pass and they said no. No tint is supposedly allowed, but got to somebody in a rough area and they will pass you. I passed inspection with smoked sidemarkers and illegal front wondows with no issues at a Chevy dealerrship lol.
Plus if they want to uphold that BS law so much, they're are always to get inspection stickers with no checking lol!
 

chistoso

Full Access Member
Joined
May 13, 2009
Posts
1,703
Reaction score
44
Location
Arizona
I went to have my truck inspected today and they came out and said dont bother.. it wont pass. Said i cant have ANY tint on my tail lights. I told him that the lights were brighter than any tail light in his parking lot. He said it doesnt matter - They wont pass. That they have to be red. With that in mind, i dont see how all those clear tail lights would pass. Does anyone know about this sort of thing? Here is a pic of my tail lights - They are LED and Bright as hell:
taillights%20003.jpg


Here is a pic with just the tail lights without the brakes:
taillights%20002.jpg

How did you get both parts of the LED's ti light up with the parking lights.. We have the exact same ones and mine only light up at the top part the bottom is only for brakes, top is parking and signals.

Sorry about your dilemma, hopefully someone local can come thru and help ya out..
 
OP
OP
ballsie

ballsie

Full Access Member
Joined
May 4, 2009
Posts
259
Reaction score
1
Location
austin texas
How did you get both parts of the LED's ti light up with the parking lights.

I think i had the hazard lights on when i took that pic.


Anyway, I just took it to a shop by my house and the guy passed it with no questions.. I actually asked him if they were gonna be a problem and he said as long as they work it will be fine.

Thanks for the offer JK, but i am good to go. I was kinda hoping he would fail the exhaust so i could pick up a magnaflow.. oh well.
 

brndns_hoe

Full Access Member
Joined
May 4, 2009
Posts
864
Reaction score
5
Location
Plano, TX
what do u mean by clear ones? taillights? that still shine red right? cos they are clear, not hindering the red light emitting. in texas, the rears have to be red or amber, in front, amber or with(for example, clear corners are legal). and tx regs don't say no tint, but that the light can't be hindered at all, and that's how they answer the question of if tint is legal. then again, when i did inspections, i noticed for window tint, it couldn't be less than 20% light, but the stores tell you 35%. I think the cops can get you for less than 35 but for inspection purposes it's 20.

---------- Post added at 04:58 PM ---------- Previous post was at 04:55 PM ----------

haha, i just wrote all that, then saw you just posted saying you got it taken care of. some inspectors will let it go, some won't. at least you didn't have to go through the trouble of switching them out temporarily, makes life easier
 

brndns_hoe

Full Access Member
Joined
May 4, 2009
Posts
864
Reaction score
5
Location
Plano, TX
hahaha, and with cameras to monitor you and make sure you don't exceed the limit
 

NJ04HOE

Full Access Member
Joined
May 1, 2009
Posts
1,516
Reaction score
77
Location
Paterson, NJ
soooo why not put the stockers in and get it inspected and then swap the others back in lol

That's what I do every two years with my truck and my wifes car, all stock lights for no more than an hour then i'm back to normal.
 

DESIGN

Member
Joined
May 16, 2009
Posts
47
Reaction score
0
Location
North Texas
Just to all my fellow Texans: never go to Kwik Kar lube and tune for state inspections. They don't seem like they ever want any business. Wanted to have them change the manual tranny fluid in another car but wanted them to use the Redline MT-90 that I had. They said that they had liablity issues with using customer's fluid. Asked them if they could buy the fluid I wanted and they said no. Another time they would pass a car because it had a front tint banner on it. Just in general not helpful.
 
OP
OP
ballsie

ballsie

Full Access Member
Joined
May 4, 2009
Posts
259
Reaction score
1
Location
austin texas
Just to all my fellow Texans: never go to Kwik Kar lube and tune for state inspections.

Kwik Kar was the place that said it wouldnt pass.. I really think the guy was being lazy. I asked him how long the wait was and he replied with, "There are 2 people ahead of you, but your wasting your time because Its not going to pass."

The irritating parts about it is that these lights are not "too dark." I really want them as black as night, but i was afraid of inspection - among other things. My old lights were WAY darker.
 

brndns_hoe

Full Access Member
Joined
May 4, 2009
Posts
864
Reaction score
5
Location
Plano, TX
that's what suprised me, they're not that dark, think he was just on a power trip..and lazy as you said
 

Modded

That Guy
Joined
May 3, 2009
Posts
6,942
Reaction score
109
Haha looks like I've confirmed the boys at Kwik Kar are assholes!
 

Max

Mile High
Joined
May 3, 2009
Posts
3,570
Reaction score
33
Location
Denver
Damn that sucks dude. I haven't had any issues and mine are black as ****.
 

hapyspaz

Full Access Member
Joined
May 2, 2009
Posts
285
Reaction score
9
Location
Austin
Different laws in different states.

Not to defend to Kwik Kar employees (I used to be one), they are just doing their job on inspections. The laws states that there can be no tinting, aka, blackouts, on the front or rear lights. Clear lenses are only okay if the lights themselves have the proper colored lenses or are themselves amber (signal) or red (brake/tail) in color.

I believe tint has to actually have 30% visibility on the driver and passenger front doors. Windshield tint visors cannot be below the DOT line that is marked on every windshield, and cannot not be colored ( I think there were a couple colors that could pass). Tint any where else on windows does not have a regulation.

They guys at the first place are just covering their ass, I was a state inspector for 10 years, and you dont want to get caught by a DPS test car. Lose your license, get fined, and possibly jail time.

Next time you get an inspection and someone is scrutinizing over every little thing on your car, you should be thankful. It is people like them that are keeping safer cars on the road. Also keep in mind if they pass your inspection, you kill someone in a car accident, one of the first things the police look at is the inspection sticker. If it is new, and they determing the inspector passed the vehicle overlooking something that caused the accident, the inspector is now liable for the death.
 
OP
OP
ballsie

ballsie

Full Access Member
Joined
May 4, 2009
Posts
259
Reaction score
1
Location
austin texas
I can understand all that, but my lights are brighter than stock lights. I wouldnt have a problem wih it if you couldnt see my lights. I still think the guy at kwik kar was a douche. He was either lazy, wanted to get out of work at a decent hour, or just REALLY didnt like my truck...
 

ItsAdam1

Master Fabricator
Joined
Jun 7, 2009
Posts
78
Reaction score
1
Location
Sugar land, Tejas
damn I never heard of that, but they guys that do my inspections don't give a crap they will pass it or even help me pass by tricking the system.......
 
Back
Top