Finally posting a "build" thread. The progression of my stupidity.

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

OP
OP
RooTBeeRthe1st

RooTBeeRthe1st

Full Access Member
Joined
Jul 11, 2018
Posts
1,226
Reaction score
2,854
Regular 87 & Stock(catback only) is junk! Only pulls .5g acceleration, so slow, and so numb.
This wasn't stalled up or anything, just matt the pedal.
 

Attachments

  • Screenshot_20220630-063726.png
    Screenshot_20220630-063726.png
    151.3 KB · Views: 20
Last edited:
OP
OP
RooTBeeRthe1st

RooTBeeRthe1st

Full Access Member
Joined
Jul 11, 2018
Posts
1,226
Reaction score
2,854
Well, figured since I got her to pass smog yesterday, I'd treat her with an optima yellow top...To replace my champion battery that's less than 2 years old from pep boys(that no longer exists)...Had a 4-year warranty, made it about 18 months before it took a crap. It's actually been dead for a few months, but thankfully my other optima yellow top that I added 3 years ago has kept me going this whole time... That said, this yellow top was about twice the price of that other garbage that I just took out.
 

Attachments

  • IMG_20220630_162355867.jpg
    IMG_20220630_162355867.jpg
    354.4 KB · Views: 24
  • IMG_20220630_172219504_HDR.jpg
    IMG_20220630_172219504_HDR.jpg
    288.5 KB · Views: 19
OP
OP
RooTBeeRthe1st

RooTBeeRthe1st

Full Access Member
Joined
Jul 11, 2018
Posts
1,226
Reaction score
2,854
About 50lbs heavier this morning than yesterday. Still a tad quicker. This is with my old tune, trans definitely didn't have enough time to learn(still a bit softer than it was).
Didn't touch the maf or pe tables, GM turned this thing pig rich I guess.
Definitely need to fix my AN line for the ethanol sensor so I can get the good stuff back in it.
Do a run like that, then I guess intake back on and old air/fuel tables to go with it.

 

Attachments

  • Screenshot_20220701-062557.png
    Screenshot_20220701-062557.png
    152.9 KB · Views: 24
Last edited:
OP
OP
RooTBeeRthe1st

RooTBeeRthe1st

Full Access Member
Joined
Jul 11, 2018
Posts
1,226
Reaction score
2,854
Well, I finally went and rebuilt my flex fuel line adapter.
Didn't put it on yet.
But tried to do some tuning without it, and no matter what I did it was commanding like, 10.3afr. realized that was due to the virtual sensor failing and reading incorrectly, and then even when I updated the tune and told it there's a physical sensor, (despite not having it connected), it was reading zero but still apparently throwing an error and telling it to run super rich ...
So I'm going to try and redo all that testing once I put the physical sensor back in and really see what it does.
I should have known something was up when I saw the stock tune running as rich as it was. I don't remember ever seeing those numbers previously.

In other news, the trans has finally gotten real close to what it was previously. Starting to feel real good and firm again. Haven't retuned the trans, just writing calibrations to the E(P)CM.
 

Attachments

  • IMG_20220704_193238964.jpg
    IMG_20220704_193238964.jpg
    239.8 KB · Views: 25
  • IMG_20220704_184556493.jpg
    IMG_20220704_184556493.jpg
    199 KB · Views: 23
  • IMG_20220704_155642940_HDR.jpg
    IMG_20220704_155642940_HDR.jpg
    251.7 KB · Views: 25
OP
OP
RooTBeeRthe1st

RooTBeeRthe1st

Full Access Member
Joined
Jul 11, 2018
Posts
1,226
Reaction score
2,854
Finally put the lubelocker gasket on the 14bolt to replace the new and failed felpro I had on there.
Topped it off with amsoil.
No puddles under it this morning.

Needs a wash and check the oil level before I put a few hundred miles on it this weekend.
 

Attachments

  • IMG_20220804_192513714.jpg
    IMG_20220804_192513714.jpg
    339.2 KB · Views: 20
  • IMG_20220804_190541658.jpg
    IMG_20220804_190541658.jpg
    212.8 KB · Views: 27
OP
OP
RooTBeeRthe1st

RooTBeeRthe1st

Full Access Member
Joined
Jul 11, 2018
Posts
1,226
Reaction score
2,854
Got the new Mechman 250amp alt installed after the original 165,000mi-old 160amp alt started dropping voltage at idle.
With the original alternator, my belt tensioner was perfectly in between the lines, with the new one having a smaller pulley, it's at the most loose part of the tensioner mark.
 

Attachments

  • IMG_20220924_143145168.jpg
    IMG_20220924_143145168.jpg
    165 KB · Views: 23
  • IMG_20220924_141628378.jpg
    IMG_20220924_141628378.jpg
    363.1 KB · Views: 24
  • IMG_20220924_141611735.jpg
    IMG_20220924_141611735.jpg
    417.9 KB · Views: 17
  • IMG_20220924_141541882.jpg
    IMG_20220924_141541882.jpg
    444.3 KB · Views: 26
  • IMG_20220922_141911424_HDR~2.jpg
    IMG_20220922_141911424_HDR~2.jpg
    246.1 KB · Views: 29
OP
OP
RooTBeeRthe1st

RooTBeeRthe1st

Full Access Member
Joined
Jul 11, 2018
Posts
1,226
Reaction score
2,854
Did "the big 3" upgrade.
Still need to get some loom to cover up the wires from some abrasion that is likely to happen.
And once I run a new lead for my sub amp, I will shorten and re-terminate the wires going into the distribution block on the positive terminal to clean that up.
And although the original cable still looks great and hasn't had an issue, I will probably replace the wire for the starter as well at the same time as that other stuff.
 

Attachments

  • IMG_20221001_142519432.jpg
    IMG_20221001_142519432.jpg
    274.1 KB · Views: 36
  • IMG_20221003_171436377.jpg
    IMG_20221003_171436377.jpg
    338.6 KB · Views: 37
  • IMG_20221003_171400509.jpg
    IMG_20221003_171400509.jpg
    367.6 KB · Views: 36
  • IMG_20221003_171337327.jpg
    IMG_20221003_171337327.jpg
    365.6 KB · Views: 29
  • IMG_20221003_171351488.jpg
    IMG_20221003_171351488.jpg
    352.4 KB · Views: 32
OP
OP
RooTBeeRthe1st

RooTBeeRthe1st

Full Access Member
Joined
Jul 11, 2018
Posts
1,226
Reaction score
2,854
Well, bought some more trash.
Borrowed my buddies trailer to grab it.
And temporarily storing the eyesore on his property.
Tongue weight was pretty good despite the squat. It actually rode better with all that weight over big bumps than when I'm not towing.
And the king shocks handled the bumps like a champ. No bouncing around. Apparently they're dual purpose. Off-road and towing they seem to do the job exceptionally well.

The TaHoe may have a new name. TowHoe.
 

Attachments

  • IMG_20221210_125323645_HDR.jpg
    IMG_20221210_125323645_HDR.jpg
    409.9 KB · Views: 41
  • IMG_20221210_125821935_HDR.jpg
    IMG_20221210_125821935_HDR.jpg
    420.7 KB · Views: 29
  • IMG_20221210_140731980.jpg
    IMG_20221210_140731980.jpg
    275 KB · Views: 38
OP
OP
RooTBeeRthe1st

RooTBeeRthe1st

Full Access Member
Joined
Jul 11, 2018
Posts
1,226
Reaction score
2,854
Grabbed an aluminum 5.3 to start "building"
 

Attachments

  • IMG_20230727_155042498.jpg
    IMG_20230727_155042498.jpg
    343.6 KB · Views: 29
  • IMG_20230727_155035148_HDR.jpg
    IMG_20230727_155035148_HDR.jpg
    372.3 KB · Views: 31
  • IMG_20230727_155048603.jpg
    IMG_20230727_155048603.jpg
    258.3 KB · Views: 32
  • IMG_20230727_155633514_HDR.jpg
    IMG_20230727_155633514_HDR.jpg
    249.9 KB · Views: 29
OP
OP
RooTBeeRthe1st

RooTBeeRthe1st

Full Access Member
Joined
Jul 11, 2018
Posts
1,226
Reaction score
2,854
Tire rotation, oil change, 4.5 year old battery out, new battery in, and check up on the 18-month-old battery.
 

Attachments

  • IMG_20231019_214320244.jpg
    IMG_20231019_214320244.jpg
    168.6 KB · Views: 29
  • IMG_20231019_153802836_HDR.jpg
    IMG_20231019_153802836_HDR.jpg
    280.4 KB · Views: 26
  • IMG_20231019_212359574.jpg
    IMG_20231019_212359574.jpg
    243.9 KB · Views: 29
  • IMG_20231019_154045525_HDR.jpg
    IMG_20231019_154045525_HDR.jpg
    391.9 KB · Views: 25
  • IMG_20231019_212211566.jpg
    IMG_20231019_212211566.jpg
    293.3 KB · Views: 30
OP
OP
RooTBeeRthe1st

RooTBeeRthe1st

Full Access Member
Joined
Jul 11, 2018
Posts
1,226
Reaction score
2,854
Barks 2nd on 33" MTs!

Yeah, that's a tune I found on HP tuners website which I believe came from a guy with a truck because he said it will chirp second and third. No luck on 3rd with mine.
But that's also how I broke the 10 bolts was by getting a little greedy with that tune. Still haven't taken that apart and figured out what actually broke. But put it back to that guy's tune, and put the 14 bolt in, and no issues.
The 10 bolt actually lived on that guy's tuned for a year or two I want to say until I changed a couple parameters a bit on the aggressive side apparently.
 

ZEUS1

Member
Joined
Aug 1, 2023
Posts
87
Reaction score
232
Nice build, My current plan is for a very similar build on my 06. I am also building my motor with The Truck Norris. How do you like it? My tuner has reservations of how well it will perform with what i am planning. I also love the "Luvs" in the back ground, my folks had one when i was a kid, they bring back fond camping memories.
 
OP
OP
RooTBeeRthe1st

RooTBeeRthe1st

Full Access Member
Joined
Jul 11, 2018
Posts
1,226
Reaction score
2,854
Got some maintenance taken care of.
New fuel pump and vapor canister.
Unfortunately the only reason I was hoping to have to drop the tank and swap fuel pumps was the quest for more power, but reality said otherwise.
All things considered, all the miles, all of its years of snow, and all of my years of dirt, the top of the tank was actually really clean.
Only a bit of dirt underneath the lock ring for the fuel pump.
Inside the tank was completely spotless.
The filter and fuel pump housing said otherwise.
 

Attachments

  • IMG_20231029_121741607.jpg
    IMG_20231029_121741607.jpg
    245 KB · Views: 26
  • IMG_20231029_171247468.jpg
    IMG_20231029_171247468.jpg
    279.4 KB · Views: 24
  • IMG_20231029_143548108_HDR.jpg
    IMG_20231029_143548108_HDR.jpg
    426.9 KB · Views: 24
  • IMG_20231029_153717790.jpg
    IMG_20231029_153717790.jpg
    360.5 KB · Views: 22
  • IMG_20231029_155130010.jpg
    IMG_20231029_155130010.jpg
    127 KB · Views: 26
OP
OP
RooTBeeRthe1st

RooTBeeRthe1st

Full Access Member
Joined
Jul 11, 2018
Posts
1,226
Reaction score
2,854
5pic limit
 

Attachments

  • IMG_20231029_173805590.jpg
    IMG_20231029_173805590.jpg
    294.1 KB · Views: 23
  • IMG_20231029_173755052.jpg
    IMG_20231029_173755052.jpg
    306.7 KB · Views: 23
  • IMG_20231029_145835152_HDR.jpg
    IMG_20231029_145835152_HDR.jpg
    427.1 KB · Views: 24
  • IMG_20231029_145817285_HDR.jpg
    IMG_20231029_145817285_HDR.jpg
    533.4 KB · Views: 23
  • IMG_20231029_173724517.jpg
    IMG_20231029_173724517.jpg
    175.8 KB · Views: 25
OP
OP
RooTBeeRthe1st

RooTBeeRthe1st

Full Access Member
Joined
Jul 11, 2018
Posts
1,226
Reaction score
2,854
Nice build, My current plan is for a very similar build on my 06. I am also building my motor with The Truck Norris. How do you like it? My tuner has reservations of how well it will perform with what i am planning. I also love the "Luvs" in the back ground, my folks had one when i was a kid, they bring back fond camping memories.
I actually haven't gotten to put it in yet. California smog laws ruin everything.
Just had it sitting around. And actually debating putting in the BTR torque cam instead so I don't have so much idle chop.
Oh nice! My dad liked them when he was growing up, and then when it came time to get me a car at 16 he found a baby blue 78 and so I drove that around for the first few years, ended up tracking down one of my own, four-wheel drive later, and I've had that for almost 10 years now.

I've had the truck Nora sitting around for quite some time, just got the torque cam today.

What's even worse, is I've had a Whipple supercharger kit sitting around for like 3 or 4 years now.
 

Attachments

  • IMG_20231030_144640627~2.jpg
    IMG_20231030_144640627~2.jpg
    206.6 KB · Views: 21
  • IMG_20231030_145239149.jpg
    IMG_20231030_145239149.jpg
    295.2 KB · Views: 22

Forum statistics

Threads
137,686
Posts
1,989,603
Members
102,687
Latest member
JohanZ
Back
Top