"Hot" Side Unboxing - Twin Turbo Install

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

CMoore711

Full Access Member
Joined
Jul 18, 2017
Posts
1,170
Reaction score
905
Right now its just a whole bunch of buyers remorse. Truck threw a check engine light 2 days after I picked it up. It was shifting really rough, wideband stopped working, carbon smell in cabin, you could hear the knock retard. I dropped it off and was told the error code was a high voltage spike with the MAP sensor. Tuner still has it.

On the up side, it drove like a champ and was fast AF for the few days that it ran properly. I'll post another update once I get it back.

Oh no! Well hopefully it was just related to the voltage spike and no actual hard part engine failure. If it would be a hard part engine failure then IMO the choice would be easy right? Build a block and shoot for 1,000+
 

Thrust

Full Access Member
Joined
Oct 23, 2020
Posts
441
Reaction score
516
Location
ICT
Any updates? Hope things went well and you are back on the road.
 
OP
OP
RThomasII

RThomasII

Full Access Member
Joined
Jun 25, 2016
Posts
207
Reaction score
304
Update....

I've been hella busy with work and home improvement projects but I managed to yank/tear down the engine this week. The original plan was to just do a DOD delete kit install but that project quickly snowballed into the decision to also do drop-in pistons and a mild cam.

Also trying to figure out a better solution for the A-Pillar gauge pod. If anybody has any ideas for the gauges let me know.

Once I get this thing back together and on the dyno I'm hoping for 800hp at the wheels with low boost.

20220617_163739.jpg

20220617_163809.jpg


20220617_163714.jpg
 

gat0r

Full Access Member
Joined
Dec 11, 2015
Posts
3,106
Reaction score
5,828
Location
DFW
re:
better solution for the A-Pillar gauge pod

find a local custom interior shop. they should be able to spray it same color or even wrap it in a nice material.

if not, find a place that does cerakote... they should be able to get a spray match ;)





also, is that pillar pod from glowshift or ?




* if you want a diff location
maybe contact: https://www.ortizcustompods.com/chevrolet.html

ive been considering steering column or side dash pod options. & working w/ him. since he has stuff close to ours from truck ;)
 

Thrust

Full Access Member
Joined
Oct 23, 2020
Posts
441
Reaction score
516
Location
ICT
What are your choices on cam and pistons? Curious on your cam choice since you are boosted. Any thoughts on mild porting or clean up on the heads?
 
OP
OP
RThomasII

RThomasII

Full Access Member
Joined
Jun 25, 2016
Posts
207
Reaction score
304
What are your choices on cam and pistons? Curious on your cam choice since you are boosted. Any thoughts on mild porting or clean up on the heads?
Nothing special....

GPI drop in pistons
Callies compstar rods
VVT-2 Cam - 32% fuel lobe

No plans to port the heads. I would love to dig into the motor more but I'm waaaay over budget as it is.

 

Forum statistics

Threads
128,786
Posts
1,805,403
Members
91,766
Latest member
GeorgeC

Latest posts

Top