What did you do to your NNBS GMT900 Tahoe/Yukon Today?

[Tonyrodz]

I would love some long tubes, but this ****** state only approved some shorty headers so there's really no reason in changing out the manifolds

Just think of the money they're saving you!

 

[RooTBeeRthe1st]

Just think of the money they're saving you!

Bah!
That stuff grows on trees ya know. Lol

 

[Tonyrodz]

Bah!
That stuff grows on trees ya know. Lol

I need one of those trees in my yard!

 

[89Suburban]

Spent some quality time removing door moulding and goo

Sent from my iPhone using Tapatalk

Here is a before pic

Sent from my iPhone using Tapatalk

That's a beautiful girl there .

 

[1BADI5]

I'm interested to see what you come up with.

A rather shade tree move, but it was a solid solution. Pictures to follow

 

[George B]

Ugh!

• Checked the plug > Good
• Checked the resistance of the shock > Open
• Plugged it back in and drove to work > No service suspension message anymore.

I suspect a faulty shock.

Going to check the code again when I get home.

 

[Geotrash]

A rather shade tree move, but it was a solid solution. Pictures to follow

View attachment 278259 View attachment 278260 View attachment 278261

Solid solution, in my opinion.

Side note: I have Scorpion Verde's on my LR2. 20,000 miles and they're due for replacement (even wear, good alignment). I'm pretty sure they're made of Parmesan cheese.

 

[Geotrash]

Ugh!

• Checked the plug > Good
• Checked the resistance of the shock > Open
• Plugged it back in and drove to work > No service suspension message anymore.

I suspect a faulty shock.

Going to check the code again when I get home.

View attachment 278265

Or perhaps a faulty connection. Whenever I remove the connector from those, I use electrical contact cleaner before I put it back on. Otherwise I get the same error.

 

[1BADI5]

Solid solution, in my opinion.

Side note: I have Scorpion Verde's on my LR2. 20,000 miles and they're due for replacement (even wear, good alignment). I'm pretty sure they're made of Parmesan cheese.

Thanks, I did not pull the plastic on the Gorilla tape., so I can actually remove the caps. They're in there nice and snug.

As far as the tires, got them off my buddies SRT8 Jeep. The tahoe loves to get sideways on these tires LOL

 

[George B]

Or perhaps a faulty connection. Whenever I remove the connector from those, I use electrical contact cleaner before I put it back on. Otherwise I get the same error.

But what about the fact the shock tested open with no resistance? Should be around 3.5 Ohms right?

 

[1BADI5]

Well let's see if I can beat the rain

 

[89Suburban]

A rather shade tree move, but it was a solid solution. Pictures to follow

View attachment 278259 View attachment 278260 View attachment 278261

What's goin on here???? You running 4WD hubs with no CV shafts?? I always thought they helped keep the bearing from coming apart? Is that ********? Seriously, I am curious about this.

 

[1BADI5]

All done. Spent more time cleaning the evaporator then anything else.......she was definitely a K9 unit.

The ac has to be at least 10* cooler now. Best Dorman product to date

 

[1BADI5]

What's goin on here???? You running 4WD hubs with no CV shafts?? I always thought they helped keep the bearing from coming apart? Is that ********? Seriously, I am curious about this.

The 2wd PPVs run them from the factory

 

[Fless]

What's goin on here???? You running 4WD hubs with no CV shafts?? I always thought they helped keep the bearing from coming apart? Is that ********? Seriously, I am curious about this.

Read this short thread:
https://www.tahoeyukonforum.com/threads/2wd-and-4wd-hubs.62268/

 

[Sparksalot]

What's goin on here???? You running 4WD hubs with no CV shafts?? I always thought they helped keep the bearing from coming apart? Is that ********? Seriously, I am curious about this.

Both of the twins have these.

 

[Rocket Man]

All done. Spent more time cleaning the evaporator then anything else.......she was definitely a K9 unit.

The ac has to be at least 10* cooler now. Best Dorman product to date

View attachment 278289 View attachment 278290 View attachment 278291

There’s not many of them but I agree, that’s one.

 

[08z71bgm]

Well let's see if I can beat the rain

View attachment 278286

I have mine still in the box for months. Don’t want to hack it up.

 

[08z71bgm]

All done. Spent more time cleaning the evaporator then anything else.......she was definitely a K9 unit.

The ac has to be at least 10* cooler now. Best Dorman product to date

View attachment 278289 View attachment 278290 View attachment 278291

You used utility blades?

 

[Rocket Man]

What's goin on here???? You running 4WD hubs with no CV shafts?? I always thought they helped keep the bearing from coming apart? Is that ********? Seriously, I am curious about this.

If they’re Timken they’re fine, I know that much.