What did you do to your NNBS GMT900 Tahoe/Yukon Today?

[iamdub]

Your stance is perfect!! Your photoshop is not haha. I was sitting there imagining how much work would go into getting that low when I realized!

Can't expect a whole lot from a free app! I don't know why it keeps deleting the tailpipe, running boards and air dam. It was just something to play with.

And, yeah, a LOT of work. Relocating stuff under the hood, tubbing the firewall, relocating stuff above the rear axle, tubbing the rear fenders, modifying the second row seats to clear the tubs, tube chassis if body dropping, and a whole lot more.

 

[iamdub]

Noticed on springs they have white stripe painted on have no idea what that is for.

It's basic LS engine knowledge that those are your "north" stripes. They indicate proper orientation/clocking of the springs. They should all be facing "north" or "up", towards the intake manifold. I hope you don't drop a valve.

 

[PG01]

I’m in a ‘mood’ chris

 

[iamdub]

My engine oil priming setup, hopefully it works when it comes time...
Bought the little adapter for something like $8 on amazon.
View attachment 266005

This one?

https://www.amazon.com/dp/B08MPLQ26...jbGlja1JlZGlyZWN0JmRvTm90TG9nQ2xpY2s9dHJ1ZQ==


I got this one: https://www.amazon.com/gp/product/B015NFR82Y/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1


I don't know why I didn't get yours for half the price. Maybe it was an availability thing at the time.

 

[iamdub]

Since I'm not a fan of mismatched wheels (22s and a spare), I swapped the 22s for my race wheels.

I call 'em that since they're basic and 11 lbs. lighter than the 22s.

2019 OEM Tahoe RST 22" with 285/45-R22 Bridgestone Dueler H/L Alenza:

GMT900 Sierra OEM 20", de-cladded, with 275/55-R20:

Carnage to 22" tire:

 

[Kee Fuller]

After a month got my rig back from the body shop. Anyone know the part numbers on the trim around the windows. It’s faded and I’d like to replace em.

 

[Tonyrodz]

After a month got my rig back from the body shop. Anyone know the part numbers on the trim around the windows. It’s faded and I’d like to replace em.

View attachment 266052 View attachment 266056

Looks amazing!

 

[Sam Harris]

Looks amazing!

X2! Right on man! Merry Christmas!

 

[Just Fishing]

This one?

https://www.amazon.com/dp/B08MPLQ26...jbGlja1JlZGlyZWN0JmRvTm90TG9nQ2xpY2s9dHJ1ZQ==


I got this one: https://www.amazon.com/gp/product/B015NFR82Y/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1


I don't know why I didn't get yours for half the price. Maybe it was an availability thing at the time.

Exact same thing yes.

The one i bought was a few cents higher though...

https://www.amazon.com/gp/product/B07NW1XKHR/

 

[Rocket Man]

'Bagged it.


Aired up:

View attachment 265993



Aired out:

View attachment 265994

Yeah riiiiight. Lost your third row and half your second row too huh? Psssh.

 

[Rocket Man]

Nice. Now id end up forgetting to leave it aired up and come out one day to it frozen to the ground

You mean like my Silverado? It actually did freeze to my driveway once last winter. It was only for a few hours until things warmed up. I normally stick some 2x 4’s under the frame at 4 locations if it looks like it might happen but it’s rare.

 

[Rocket Man]

After a month got my rig back from the body shop. Anyone know the part numbers on the trim around the windows. It’s faded and I’d like to replace em.

View attachment 266052 View attachment 266056

Looking good brother. BTW that trim is a PIA to replace, gotta pull the glass. There’s a couple of the bolts that are hard to get to too.

 

[Just Fishing]

I ache.

Got a ton done, but i was hoping to get further today.

got the driver side rockers in place after clearance the trunnion kit.
Not fully installed, but in place... lol

Once rockers are done, then i get to install the valve covers and intake.
Then water pump, new hoses, and brackets, wires, etc.
Then skid plates and wheel.

Then i get to go outside!!

w00t!







probably one more weekend.
lets hope i didn't fk anything up....

 

[Just Fishing]

Oh and that one broken bolt i had fixed.

Yeah i'm glad it was broken.

What a pita!

It was hard to install, i can only imaging what it would have been like to remove....





I go tired time now.

 

[Doubeleive]

Looking good brother. BTW that trim is a PIA to replace, gotta pull the glass. There’s a couple of the bolts that are hard to get to too.

hmm, they must have changed something then. Mine just slides off, new one slides on

 

[Rocket Man]

hmm, they must have changed something then. Mine just slides off, new one slides on

The trim around the windows just slides off? I take it he’s talking about the channel and not the horizontal trim at the bottom of the glass. Those do pop off but I’m talking the channel that the glass slides up and down in. Maybe I misunderstood him but “around the windows” means around the windows to me lol.

 

[Kee Fuller]

The trim around the windows just slides off? I take it he’s talking about the channel and not the horizontal trim at the bottom of the glass. Those do pop off but I’m talking the channel that the glass slides up and down in. Maybe I misunderstood him but “around the windows” means around the windows to me lol.

The trim around the windows just slides off? I take it he’s talking about the channel and not the horizontal trim at the bottom of the glass. Those do pop off but I’m talking the channel that the glass slides up and down in. Maybe I misunderstood him but “around the windows” means around the windows to me lol.

I see the bottom part of the front windows just slides off and on. What about the rear windows? Mines are cruddy and fading

 

[Rocket Man]

I see the bottom part of the front windows just slides off and on. What about the rear windows? Mines are cruddy and fading

Rears are the same.

 

[iamdub]

Yeah riiiiight. Lost your third row and half your second row too huh? Psssh.

Just took out the second row altogether cuz I've always wanted a Tahoe coupe. Have my compressors, manual valves, amps and RGB LEDs screwed to a sheet of plywood back there. Makes for easy access to the hose clamps when trying to slow the leaks! #builtnotbought

 

[iamdub]

Once rockers are done, then i get to install the valve covers and intake.

Leave the covers off until after you prime the oil system so you'll know when the oil is at all the rockers.