Pioneer radio

[Ramiro0727]

You will need both of these...

iDatalink HRN-AV-GM5 Maestro RSE Retention Harness for Select 06-14 GM Vehicles.

iDatalink ADS HRN-RR-GM5+ Interface Harness Chime Speaker for select 2006-up GM

If you have a 3rd row screen then you will also need to splice a couple wires i believe but i don't have a 3rd row screen so I never bothered to figure it out.

I believe Wes @Doubeleive or one of the other guys can tell you more about the 3rd row mod.

And here is all the wiring you get to stuff behind the HU....

View attachment 257678

Kbuskill, Will those harnesses keep the factory Satellite radio?

Thanks,

Ramiro

 

[kbuskill]

Kbuskill, Will those harnesses keep the factory Satellite radio?

Thanks,

Ramiro

It is supposed to. I don't use XM so I have never tried it. Maybe I should try it and see... lol

 

[Ramiro0727]

It is supposed to. I don't use XM so I have never tried it. Maybe I should try it and see... lol

kbuskill, If you try it. Please post your results. Before I make the purchase of these harnesses

Thanks,
Ramiro

 

[kbuskill]

kbuskill, If you try it. Please post your results. Before I make the purchase of these harnesses

Thanks,
Ramiro

I will try to remember to check when I get home this evening.

 

[kbuskill]

kbuskill, If you try it. Please post your results. Before I make the purchase of these harnesses

Thanks,
Ramiro

So the answer is... Yes it works.

I signed up for the 3 month free trial and it works just fine.

 

[Ramiro0727]

So the answer is... Yes it works.

I signed up for the 3 month free trial and it works just fine.

Kbuskill, Thank you. Now time to order a new head unit and the harnesses. My Rosen unit crapped out. Its stuck on the flash screen. All that works is the radio.

Ramiro

 

[kbuskill]

Kbuskill, Thank you. Now time to order a new head unit and the harnesses. My Rosen unit crapped out. Its stuck on the flash screen. All that works is the radio.

Ramiro

My Rosen GM1210 did the same thing. I upgraded to a Kenwood and am very well pleased.

FYI there is a company on ebay that will fix the Rosen. I contacted them and sold them my old Rosen for like $90.

***EDIT***

I think this is them...
https://www.ebay.com/itm/302780028891

 

[Ramiro0727]

kbuskill, I will email them. I saw them on Ebay also. I rather would go with a nicer headunit than the Rosen. I thinking about the Kenwood DMX-706S. As long as the headunit can play movies thru USB to keep my daughter entertained during some trips on our factory rear screen.

Thanks,
Ramiro

 

[kbuskill]

kbuskill, I will email them. I saw them on Ebay also. I rather would go with a nicer headunit than the Rosen. I thinking about the Kenwood DMX-706S. As long as the headunit can play movies thru USB to keep my daughter entertained during some trips on our factory rear screen.

Thanks,
Ramiro

I went with the DNX575S and love it.

 

[Ramiro0727]

I went with the DNX575S and love it.

kbuskill does the maestro RR put the rear camera screen on the headunit. Right now my rear camera view is on my rear view mirror. Or I will have to splice into the camera feed to get to display on the new Kenwood headunit.

Thanks,
Ramiro

 

[kbuskill]

kbuskill does the maestro RR put the rear camera screen on the headunit. Right now my rear camera view is on my rear view mirror. Or I will have to splice into the camera feed to get to display on the new Kenwood headunit.

Thanks,
Ramiro

You will have to splice it.

 

[Ramiro0727]

You will have to splice it.

Kbuskill do you happen to remember which cable there are. I never got around to splicing them when I had my Rosen stereo. I ran the video cable to it back then. Hopefully I exposed the wires I need back then. I will see when I install my new headunit

Ramiro
.

 

[kbuskill]

Kbuskill do you happen to remember which cable there are. I never got around to splicing them when I had my Rosen stereo. I ran the video cable to it back then. Hopefully I exposed the wires I need back then. I will see when I install my new headunit

Ramiro
.

My Burb had the video in the HU from the factory instead of in the mirror.

You can tap into the video feed under the driver's side dash. Can't remember the exact wire colors or location but it has been done many times and is pretty well documented so shouldn't be hard to find the info.

 

[Ramiro0727]

My Burb had the video in the HU from the factory instead of in the mirror.

You can tap into the video feed under the driver's side dash. Can't remember the exact wire colors or location but it has been done many times and is pretty well documented so shouldn't be hard to find the info.

Kbuskill, I received all my harnesses. Quick question . Did u connect the stereo harnesses to the maestro GM÷5 using the low level inputs or the high inputs?

Thanks,
Ramiro

Sent from my SM-N975U using Tapatalk

 

[kbuskill]

Kbuskill, I received all my harnesses. Quick question . Did u connect the stereo harnesses to the maestro GM÷5 using the low level inputs or the high inputs?

Thanks,
Ramiro

Sent from my SM-N975U using Tapatalk

I used the low level inputs.

 

[Ramiro0727]

kbuskill, Thank you I appreciate it. Now to get my new head unit hooked up.

Ramiro

 

[Ramiro0727]

kbuskill, I got it all hooked up and my satellite radio doesnt play. It says check tuner. I know I enabled it when I programmed the Maestro RR. What did I do wrong.

Ramiro

 

[Ramiro0727]

Satellite radio works. But I get no sound. trying to figure it out. Radio works fine.

Ramiro

 

[kbuskill]

Satellite radio works. But I get no sound. trying to figure it out. Radio works fine.

Ramiro

It has been a while since I did mine but my guess would be you didn't plug one of the RCA plugs into the proper place or something like that.

I would pull the HU and double check all your connections. That is a lot of wiring to stuff into the dash and things can sometimes come unplugged.

I modified the inside of my dash to make more room.
Before....

After...

Pieces I removed...

 

[Ramiro0727]

It has been a while since I did mine but my guess would be you didn't plug one of the RCA plugs into the proper place or something like that.

I would pull the HU and double check all your connections. That is a lot of wiring to stuff into the dash and things can sometimes come unplugged.

I modified the inside of my dash to make more room.
Before....
View attachment 261229

After...
View attachment 261230

Pieces I removed...
View attachment 261231
View attachment 261232

Kbuskill. I figured it out. I had 2 connectors from the maestro RR crossed. Once I made the correction. Everything worked great. The Kenwood head unit sounds way better than the Rosen I had before. Tomorrow ill tap into the video wires for the reverse camera. So it can show up on my stereo. Thanks for all your help. Greatly appreciated.

Ramiro

Sent from my SM-N975U using Tapatalk