Bosnia0897
TYF Newbie
- Joined
- Mar 8, 2019
- Posts
- 1
- Reaction score
- 0
Do the front tires rub the inner fender liner when you are turning in reverse?Suspension maxx 1.5” and yes the kit came with the adapters.
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Do the front tires rub the inner fender liner when you are turning in reverse?Suspension maxx 1.5” and yes the kit came with the adapters.
Do the front tires rub the inner fender liner when you are turning in reverse?
Update: Took care of the the rub this morning.
Clear!
Before
View attachment 216636
After
View attachment 216638
Pulled the liner back and cut/bend the bottom metal back with metal wheel. Just takes some time. Do some research - Norcal fender tuck, probably wont find video on Tahoe but several on trucks to give you an idea.What'd you do to gain the clearance? I have a minimal amount of rubbing in this exact spot and need to do something about it.
I was considering picking these up and seeing if I could make them work on my Yukon.
http://zoneoffroad.com/blog/zone-new-product-announcement-135-gm1500-fender-trim-plates/

Here is a 2016 SuburbanView attachment 68910
Did you do anything to the rear2.5" SuspensionMaxx leveling kit
285/60/20 Goodyear Duratracs
View attachment 69882
View attachment 69883
what size level did you use
What are measurements front to back? Is there any raleske?[/QU3
front is actually little less than 1/4 higher than back. Didnt notice unitl I took measurements
Very nice. Any issues with rubbing on your setup? I'm getting my 2" leveling kit on next week and am leaning towards that same size ridge grappler on fuel maverick D538's.Stock rims 2 in front level 285/60/20 ridge grapplers
View attachment 221288 View attachment 221289 View attachment 221290 View attachment 221291 View attachment 221292
There is slight rub at full turn. But I’ve been driving almost a week now and no rub with normal driving . Even turning into tight parking spotsVery nice. Any issues with rubbing on your setup? I'm getting my 2" leveling kit on next week and am leaning towards that same size ridge grappler on fuel maverick D538's.
What offset on wheel? Less rub on fender well if you stay closer to stock offset.Very nice. Any issues with rubbing on your setup? I'm getting my 2" leveling kit on next week and am leaning towards that same size ridge grappler on fuel maverick D538's.

That looks clean. Is that grill outer frame painted or wrapped or are my eyes deceiving me? Looks like it’s white.
I ordered the oem grill off the “graphite edition” Yukon’s. Came with a paint ready outter trim and the inserts are called “midnight chrome”. So it’s painted, no wrapping