What did you do to your NBS GMT800 Tahoe/Yukon Today?

[eohat]

Installed a new ACDelco water pump in the Tahoe today. I think next time I’ll just drain the antifreeze directly on the floor since it seems to end up there anyway.

 

[73impala]

Finished up the underglow for the most part for now. Want to add some to the grille and under the body to get rid of some of the shadows.

20190122_220606 by James Pate, on Flickr

 

[Bombsquad85]

Did the knock sensor, I take manifold gasket, valley gasket and removed and cleaned the injectors replaced o-rings and cleaned the intake manifold and throttle body. I'm getting a weird creaking sound I hope it's just everything settling back in.

When the butterfly is manually moved does it make strange noises to recalibrate?

 

[Bombsquad85]

Is it normal for a lot (maybe half a cup) of oil to come out of the intake manifold?

 

[M3kanic]

Is it normal for a lot (maybe half a cup) of oil to come out of the intake manifold?

Are you running a catch can?

Sent from my SM-G955U using Tapatalk

 

[Bombsquad85]

Are you running a catch can?

Sent from my SM-G955U using Tapatalk

I am not

 

[Tonyrodz]

I am not

Probably should.

 

[Bombsquad85]

Probably should.

Got a link to a decent one? Plus I have no clue how to install it. I didnt even see any vacuum lines coming off the intake manifold

 

[Tonyrodz]

Got a link to a decent one? Plus I have no clue how to install it. I didnt even see any vacuum lines coming off the intake manifold

I bought mine used from a tyf member, but guys like catchcans.com. Easy to install. Iirc, goes between the port where the pvc plugs into on the intake snd the pvc.

 

[Sam Harris]

Got a link to a decent one? Plus I have no clue how to install it. I didnt even see any vacuum lines coming off the intake manifold

I got mine from catchcans.com. 2”, need the sealed system (PCV) model. There’s a good video I’ll have to find for you.
https://catchcans.com/collections/catch-cans/products/2-pcv-catch-can


Sent from my iPhone using Tapatalk

 

[Bombsquad85]

I bought mine used from a tyf member, but guys like catchcans.com. Easy to install. Iirc, goes between the port where the pvc plugs into on the intake snd the pvc.

I literally didnt see any vacuum lines coming off my manifold, other than 2 small ones

 

[Bombsquad85]

I got mine from catchcans.com. 2”, need the sealed system (PCV) model. There’s a good video I’ll have to find for you.
https://catchcans.com/collections/catch-cans/products/2-pcv-catch-can


Sent from my iPhone using Tapatalk

I will look into it thanks

 

[M3kanic]

This is my 2" catchcans.com can. It's hard to see but it mounted up nicely there on master cylinder.

Sent from my SM-G955U using Tapatalk

 

[HiHoeSilver]

I literally didnt see any vacuum lines coming off my manifold, other than 2 small ones

It's there. You're going to interrupt it....

Like yo ..

 

[14rcsbOH]

Who was it that said their catch can froze?

 

[M3kanic]

Who was it that said their catch can froze?

I have had my catch can in temperatures well below -40 and never had a problem.

Sent from my SM-G955U using Tapatalk

 

[Bombsquad85]

It's there. You're going to interrupt it....
View attachment 214781

Like yo ..
View attachment 214782

Thanks I have that line lol

Is there any benefit to having a catch can?

 

[M3kanic]

Thanks I have that line lol

Is there any benefit to having a catch can?

No oil in your intake and cleaner running engine.

Sent from my SM-G955U using Tapatalk

 

[Bombsquad85]

No oil in your intake and cleaner running engine.

Sent from my SM-G955U using Tapatalk

Fair enough

 

[HiHoeSilver]

Thanks I have that line lol

Is there any benefit to having a catch can?

I take about 2 oz of dirty oil out of mine at every 5000 mile OCI that would have otherwise ended up in my intake.