WTB : Push Bar

[The_Burban]

Anyone have a push bar they are not interested in keeping installed?

The .gov sites are very limited. Seems to be only new ones on eBay. Online via retailers are OK but.. with 100k on my Suburban, I do not necessarily need brand new. It can have some bumps and bruises to match.

Looking for a GoRhino or maybe the Setina... something more low profile. Not a huge, obstrusive brush guard.

In the DC area.

Thank you.

 

[CobraKing]

I'm in the same boat as you. I'm looking for a Setina or GoRhino but I'm not able to find any used ones. I've heard that they scrap them after the trucks reach the end of their service cycle over here in Canada.

 

[The_Burban]

I'm in the same boat as you. I'm looking for a Setina or GoRhino but I'm not able to find any used ones. I've heard that they scrap them after the trucks reach the end of their service cycle over here in Canada.

I found a GR on eBay. It did not have the mounts. The mounts are $100+ new.

I need to check local upfitters, too

 

[CobraKing]

I found a GR on eBay. It did not have the mounts. The mounts are $100+ new.

I need to check local upfitters, too

Shop that decommissioned my truck cut the Setina brackets that were on my truck. New ones go for $300 CDN.

 

[Solace]

www.responderpse.com
www.fleetsafety.com

Large selection of brand new pushbumpers, they won't be as cheap as finding a surplus one, but they are brand new and come with all the brackets, bolts, and warranties.

I highly recommend a Setina PB450 or a Westin Pushbumper Elite. I have a Westin on mine and it's great, and they are the toughest bars on the market outside of custom made ones. Setinas are also great and we mount hundreds of them annually.

 

[sumo]

I use progard. I actually used mine to push stuff and have been bent, bent back, rusted and repainted. The problem with this style is that they mount in place of the front toe hooks. The push bar follows the curve of the bumper so there no real support of you intend to use it as a pushbar.

 

[The_Burban]

I use progard. I actually used mine to push stuff and have been bent, bent back, rusted and repainted. The problem with this style is that they mount in place of the front toe hooks. The push bar follows the curve of the bumper so there no real support of you intend to use it as a pushbar.

View attachment 197374 View attachment 197375

That is sharp. More pics of it? Up close? Side view? Prefer it over other bars?

 

[sumo]

That is sharp. More pics of it? Up close? Side view? Prefer it over other bars?

Plenty more pics in my winter album
http://www.tahoeyukonforum.com/media/albums/winter-mode.1115/

 

[The_Burban]

Plenty more pics in my winter album
http://www.tahoeyukonforum.com/media/albums/winter-mode.1115/

Thanks. See if I can snag a deal on one.

 

[Solace]

I use progard. I actually used mine to push stuff and have been bent, bent back, rusted and repainted. The problem with this style is that they mount in place of the front toe hooks. The push bar follows the curve of the bumper so there no real support of you intend to use it as a pushbar.

View attachment 197374 View attachment 197375

All of the pushbumpers for the Tahoe utilize the front tow hook mounts, but I believe Go-Rhino or someone made tow-hooks that could mount to the pushbumper itself.

 

[The_Burban]

All of the pushbumpers for the Tahoe utilize the front tow hook mounts, but I believe Go-Rhino or someone made tow-hooks that could mount to the pushbumper itself.

Anyone?

 

[qaz5eng]

I just came across an auction for 23 Pro guard push bumpers:
https://www.govdeals.com/index.cfm?fa=Main.Item&itemid=582&acctid=42

Maybe someone wants to be the point man for a group buy? Anyone in Alabama?

Here are 2 new Setina push bars:
https://www.govdeals.com/index.cfm?fa=Main.Item&itemid=162&acctid=3268

And a westin:
https://www.govdeals.com/index.cfm?fa=Main.Item&itemid=20&acctid=7851

Hope that helps.

 

[The_Burban]

I just came across an auction for 23 Pro guard push bumpers:
https://www.govdeals.com/index.cfm?fa=Main.Item&itemid=582&acctid=42

Maybe someone wants to be the point man for a group buy? Anyone in Alabama?

Here are 2 new Setina push bars:
https://www.govdeals.com/index.cfm?fa=Main.Item&itemid=162&acctid=3268

And a westin:
https://www.govdeals.com/index.cfm?fa=Main.Item&itemid=20&acctid=7851

Hope that helps.

Thanks.
I keep an eye on there..but nothing local.

 

[ivin74]

Take your pick,

https://houston.craigslist.org/pts/d/police-setina-push-bar-pushbar/6617703313.html

 

[The_Burban]

Take you pick,

https://houston.craigslist.org/pts/d/police-setina-push-bar-pushbar/6617703313.html

Getting near New pricing and shipping.

 

[sanco]

they pop up on ebay from time to time, craigslist would be also a good venue for a used one. Patience will get you something decent. I would also check your local used police car dealerships to see if they will sell you some overstock items

I have a GoRhino, the push bar itself has holes in the side that i am pretty confident you can attach a hook to in case you need to pull the car out of shit. the push bar itself is well made, definitelly not generic ebay stuff, i wouldnt worry too much about damaging it in case you need to push or ger pulled out

 

[iLikeEggs]

I have the original Setina with the wrap arounds if anyone is interested. I used the mounts for my new Go Industries Quad bumper so you will have to come up with those. The bumper itself is fairly large but is made out of aluminum so shipping shouldn't be too bad.

 

[sanco]

If anyone in chicago area or somewhat near wants to buy mine, I am selling it. I bought it brand new, no rust, no issues, about 4 months old. Send me a PM if interested. It's a full wrap around but the headlight guards can be removed easily to leave just the center portionIf anyone in chicago area or somewhat near wants to buy mine, I am selling it. I bought it brand new, no rust, no issues, about 4 months old. Send me a PM if interested. It's a full wrap around but the headlight guards can be removed easily to leave just the center portion

 

[Eod1]

I just bought a F150 push bar off craigslist for $45. Luckily I'm a certified welder and can adapt it to the tahoe. It's a setina. So I can get accessories for Led lights for it cheap.

 

[Eod1]

Ok here is what I decided to do. I went down and got some 2 inch hitch

material and the male parts that matches. I'm going to make the push bumper a plug and play item.