Would it fit??

[Devious_Tahoe96]

I have a 12" kicker cvr in the cargo area. Its in a boxed inclosure that's ment for two subs. ( All you really need is one cvr to bump lol) I wanted to know if i get a single box enclosure, will it fit under the back seats?

 

[grnrpr68]

you will have to try but i dont think i have seen that sub under there yet try it and see

 

[Devious_Tahoe96]

I might have to buy a different sub. I know they have some 12" slim ones you can put in pick ups, they fit nice and snug, but i'll look around. I usually get my stuff from onlinecarstereo.com or this local audio store.

 

[blueflamed03]

I bet the depth is too large for an under the seat box.

 

[Devious_Tahoe96]

Well if i go with smaller sub's like 8's or 10' i can fit them under the back seats but i'll sacrifice alot of bass, which isn't what i wanna do since i like the way the cvr'***** imo.

 

[blueflamed03]

it's better to get a sub that fits and smaller, than to cram a bigger sub in a non-functional box. a 10" will do just fine

 

[Devious_Tahoe96]

Hey what kind of amp are you running?? So far i've had a 900w jensen mono amp, 1400w crunch ( went to shit 5 months later) and now a 600w koiler.

 

[drowndindreams]

the rockford fosgate p3 smart sub is what you should get. i think it does 350 rms and the enlosure needed is only like 3 or 4 inches

 

[Devious_Tahoe96]

I've been having problems with my amp lately. It makes my sub bump with no music or beat on. I have the volume on 0 and it sounds like its at the level a usually have it too. Any idea what it could be?? Oh and i've checked the fuses and they're good.

 

[97srad750]

The CVR will not fit. If you like the CVR sound you can get the CVT. It's pretty much the same sub except it's shallow mount. Most of those under seat boxes are for 2 8's, 10's, or 12's. You have several options for the sub. P3's as mentioned above, CVT's as I mentioned, and MTX makes a good shallow mount. Heck about every company makes one now.

Keep in mind you will be going from a box that has 1.25-1.5 per sub to a box that has .7 before displacement.

 

[Devious_Tahoe96]

Well i guess im just gunna trade up my system then. Does anyone have pic's of how they did the setup with the amp under the passenger seat?? Don't really like having it in the cargo area, especially when i go up to NM in the winter. Moisture + Electronic's= Bad Outcome

 

[97srad750]

Well i guess im just gunna trade up my system then. Does anyone have pic's of how they did the setup with the amp under the passenger seat?? Don't really like having it in the cargo area, especially when i go up to NM in the winter. Moisture + Electronic's= Bad Outcome

There isn't really anything to see. You just have to have an amp that'll fit under there. If your's will fit you'll know it just by sliding it under there. Then remove the seat, wire it up, and screw it down. I had enough room under my driver's seat

 

[Devious_Tahoe96]

The bolt to remove the seat belts is a T45, am I correct??