I have 2011 Yukon Denali. Both the rear and the front pumps do work. I am not getting any power at the fuse box. I replaced the multifunction switch, which did not fix the issues. Anyone else have this problem or any good ideas to fix the issues.
Windshield washer fluid has no power at the fuse box
- Thread starter Maki71
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Welcome to TYF!
You say they work? But you're trying to fix them?
You say they work? But you're trying to fix them?
tungsten
Full Access Member
- Joined
- Sep 22, 2022
- Posts
- 338
- Reaction score
- 611
I think do was supposed to be dont?
I meant the pumps work, but I am not getting power to the front pump. I have no power to the fuse.
Joseph Garcia
Supporting Member
- Joined
- Aug 2, 2018
- Posts
- 6,544
- Reaction score
- 8,592
Welcome to the Forum from NH.
Lots of knowledgeable folks here who freely share their knowledge, experiences, and perspectives. Knowledge is power.
I hope that you will become a participating member in the Forum's discussions.
Pics of the truck, please.
Sounds like a case of corrosion underneath your fuse box.
Lots of knowledgeable folks here who freely share their knowledge, experiences, and perspectives. Knowledge is power.
I hope that you will become a participating member in the Forum's discussions.
Pics of the truck, please.
Sounds like a case of corrosion underneath your fuse box.
Similar threads
