Which hid kit?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Chetrick87

Full Access Member
Joined
Apr 6, 2016
Posts
166
Reaction score
19
Hey guys i just got an 07 tahoe Lt. It came with angel eye headlights. They have halos and led strip. Which hid kit does everyone go with? In my last explorer i had a cheap ddm tuning 35w 8000k kit. I want to go with 6000k this time. What do you recommend? Also want something for my fogs as well.

20160405_143558_zps5v9adfxj.jpg
 
Last edited by a moderator:

AZSCTACO

Full Access Member
Joined
Dec 13, 2010
Posts
471
Reaction score
36
Location
Phoenix, AZ
If the headlights are the ones I think you have.....throw them in the garbage. If they are a true retrofit set, then you have a nice set. Let's see a picture and that will be a good start.
 

NathanJax

Vacation Nathan
Staff member
Administrator Moderator Supporting Member
Joined
May 9, 2009
Posts
49,141
Reaction score
943,577,204
Location
Jax, Fl
any plug and play will be the same in those headlights. The projector is very poor at producing usable light...
 

gibbygsxr

Full Access Member
Joined
Sep 5, 2012
Posts
155
Reaction score
15
Location
Kingston, NY
To answer better than "get new lights" Racesport are the ones to use. Get the G4 35W kit but only after you get new lights. Haha
 
OP
OP
Chetrick87

Chetrick87

Full Access Member
Joined
Apr 6, 2016
Posts
166
Reaction score
19
Theres an led strip that goes across half of the bottom of the light. They seem to not put out much light and the halo rings do not light up very bright.
 
Last edited by a moderator:

AZSCTACO

Full Access Member
Joined
Dec 13, 2010
Posts
471
Reaction score
36
Location
Phoenix, AZ
Those are the lights i thought you had. I bought those in black and put HID's in them. Horrible output.....basically took them off after a couple weeks and threw them in the garbage. I would recommend buying a factory replica set for $100 and either keep them halogen or put a PnP HID set in those. There will be glare to oncoming traffic unless you point them down a bit. Or do what I'm doing currently and get a real retro headlights with quality projectors and HID kit. Attached is a picture of what I think you have from Ebay.
s-l500.jpg
 

OneTwo

Full Access Member
Joined
Jul 30, 2013
Posts
202
Reaction score
62
Location
Vancouver, WA
Cheap HID kits are cheap HID kits, from my experience. I've tried several different brands and they've all had issues eventually. I haven't heard great things about the expensive brands either, but I have no personal experience with them.

I recently put a set of Starnill LED bulbs in my NBS Suburban that I've been much happier with, so maybe look into those? They're not a whole lot more expensive price-wise.

But like the gentlemen above me suggested, the main issue is your cheap projector lights. OEM lights with normal halogen bulbs would have much better light output.
 

Ridechevy09

Full Access Member
Joined
Feb 6, 2016
Posts
274
Reaction score
113
Location
South carolina
I threw my old hid kit in. Here's a comparison. The choice is yours...

Sent from my SM-S978L using Tapatalk
 

Ridechevy09

Full Access Member
Joined
Feb 6, 2016
Posts
274
Reaction score
113
Location
South carolina
I use the putco leds conversion kit. The reason being is because of the built in fan on the bukbs, that keep them cool. The hids put off a lot of heat and eventually will melt your housing. All I had to do to hook up the leds were trim the outer bezel on the back of the low beam housing. Not much. The leds bulbs are a bit bigger, but they're worth it. I had many hid kits and not one kit lasted longer than 6 months l.

Sent from my SM-S978L using Tapatalk
 

Ridechevy09

Full Access Member
Joined
Feb 6, 2016
Posts
274
Reaction score
113
Location
South carolina
And those projector headlights are shit. I wouldn't waste my money. I would buy your own projectors. And pop your headlights in the oven and retro fit them projectors your self. The process isn't hard I retrofitted led pods for my high beams. Plan on doing a projector for my low beam next.

Sent from my SM-S978L using Tapatalk
 
OP
OP
Chetrick87

Chetrick87

Full Access Member
Joined
Apr 6, 2016
Posts
166
Reaction score
19
So youre pretty much just saying anyone premade retro fit lights are garbage? I just want some smoked headlights with bright whiteish blue light. My 8000k kit was great on my explorer with regular headlights.
 

Forum statistics

Threads
138,153
Posts
2,000,651
Members
103,080
Latest member
JPeter
Back
Top