What did you do to your NNBS GMT900 Tahoe/Yukon Today?

[07Burb]

LTZ molding bought. Apparently there are holes in my pockets cuz money keeps flying away

 

[Goodinblack]

LTZ molding bought. Apparently there are holes in my pockets cuz money keeps flying away

 

[sbubbaklein]

The front looks good. I really like painting the fogs black. I've been thinking about doing the same, and now that i see it, I like the look. How difficult was the grille to install? I've had mine sitting around but never installed it.

---------- Post added at 02:44 PM ---------- Previous post was at 02:42 PM ----------



Hey Nathan, your running the E-level aren't you? If so, would you mind taking a few pics of how you have your height sensors mounted next time you are under your truck. That's the only part i need to figure out.

Grille took about 3 hours to install.
You need plenty of thin putty knives and 10 mm socket for bolts. Remove all bolts holding upper grille and facia at core support. flex grille forward and start inserting putty knives to hold the retaining tabs up. 2 clips on each side have to come off. then push the upper grille out from behind. Lower is just putty knives and retaining tabs.
Push new grill in till retaining tabs pop indicating it is all the way in. Done.

 

[shundal]

Thanks. I just need to do the lower grille. I'll give it a try this weekend.

 

[bigmiker21]

Just ordered new steering trim pieces. Now I wish I could finally decide on tires for,my 22's I've never been this decisive!

Sent from my VS980 4G using Tapatalk

 

[felixgun]

LTZ molding bought. Apparently there are holes in my pockets cuz money keeps flying away

Nordstroms?

 

[07Burb]

No...eBay

 

[felixgun]

Nice! Painted red or unpainted black?

 

[07Burb]

Unpainted so when they come in and my esky rack comes in I'll take them to my buddy who runs a body shop and have them painted. I'm stoked!

 

[NathanJax]

Hey Nathan, your running the E-level aren't you? If so, would you mind taking a few pics of how you have your height sensors mounted next time you are under your truck. That's the only part i need to figure out.

yeah. I just used the instructions on keldermans web site. I'll try to find you more info

 

[shundal]

yeah. I just used the instructions on keldermans web site. I'll try to find you more info

Thanks I'll look over their instructions again.

 

[NathanJax]

I gave the beast a bath FINALLY.

Monday through Wednesday I put 1,000 miles on her going to visit soulsea (Serge), then goodinblack (Lee) and then going to The Masters practice round. Couldn't wash it Thursday or Friday because I had other stuff going on. But today it had a real good cleaning

 

[soulsea]

Here's the thing ... every time I have a vehicle washed, water dribbles slowly from under body parts and then I have little water stains all over the black paint or glass. Used to drive me batpoop crazy on the Esky under the rear spoiler and under the mirrors, and there's a couple of spots on the RR as well. Once they've dried it's a pita to get them out and I'm always afraid to rub on the paint too much, so they stay there till the next wash.

 

[NathanJax]

Esky under the rear spoiler and under the mirrors

Yup. I noticed those ALL the time

 

[Goodinblack]

Gave my suburban a real good bath tonight as well. Bird poo and pollen all over the place

 

[07Burb]

Failed attempt #2 at replacing the liftgate appliqué

 

[Regency]

Gave the Yukon and Jeep a bath.

 

[Goodinblack]

Failed attempt #2 at replacing the liftgate appliqué

Whats the hang up?

---------- Post added at 09:10 PM ---------- Previous post was at 09:10 PM ----------

Gave the Yukon and Jeep a bath.

Marcus........ where you been?

 

[07Burb]

Gotta get the windshield wiper motor out of the way to get to one of the bolts and it's being stubborn

 

[Goodinblack]

Gotta get the windshield wiper motor out of the way to get to one of the bolts and it's being stubborn

Gently Heat it with propane