What did you do to your NNBS GMT900 Tahoe/Yukon Today?

[a4edwin]

Changed the hatch struts. Did it by myself. Super easy but I highly recommend an assistant

 

[89Suburban]

Changed the hatch struts. Did it by myself. Super easy but I highly recommend an assistant

This was my assistant when I replaced mine.

https://www.basspro.com/shop/en/star-brite-boat-hook?hvarAID=shopping_googleproductextensions&ds_e=GOOGLE&ds_c=BPS%7CShopping%7CSmart%7CBoating%7CGeneral%7CNAud%7CTopPerf%7CNMT&gclid=CjwKCAiA8OmdBhAgEiwAShr405ems1iBNciHHeDIAKPS-iYfVNgGAzeoXUinTDmCTBKV-lsm6guzAxoC_1AQAvD_BwE&gclsrc=aw.ds

 

[tungsten]

Test drove a truck with 150k on it fuel was at 9999.9L Canadian and hours at 24.2. I’ve seen a few now with messed up hours.

 

[Fubar0715]

Couple more. Factory tire was basically flat. Never been down. Cleaned it, aired it up. Damn fine body work. Looks like an aftermarket bumper. View attachment 389199View attachment 389200View attachment 389201View attachment 389202

FWIW, my rear bumper is broken at those same locations....Defective or piss poor body work????

 

[Doubeleive]

FWIW, my rear bumper is broken at those same locations....Defective or piss poor body work????

they all do that it's a weak spot both front and rear have the same design

 

[swathdiver]

Test drove a truck with 150k on it fuel was at 9999.9L Canadian and hours at 24.2. I’ve seen a few now with messed up hours. View attachment 389212

Happens all the time. People reset them, batteries go dead or are disconnected for too long, etc.

 

[Sparksalot]

they all do that it's a weak spot both front and rear have the same design

Thecopcar is broken at both spots. Mainly because of departure angle off road. Oops.

 

[Doubeleive]

Thecopcar is broken at both spots. Mainly because of depar angle off road. Oops.

all it does is kind of hold the bottom lip edge from drooping, I think my front ones are hanging on by a thread and it's never been a problem

 

[Onlyone]

FWIW, my rear bumper is broken at those same locations....Defective or piss poor body work????

Nothing a drill and a few zip ties can’t fix.

 

[m1dn]

Took yukon to tire shop today to remove present i got from trip to Ohio over i-75.

And also picked up Predator 2 unlocked tuner from Diablosport over the weekend, installed their tune and increased the idle rpm a little, mine was toooo low ( 500 ), yukon drives amaaaaazing now

 

[Just Fishing]

FWIW, my rear bumper is broken at those same locations....Defective or piss poor body work????

Mine too,
I assumed I broke those tabs by driving through brush, but who knows.

I fixed it by drilling holes and breaking out my safety wire pliers to spin up some stainless wire.
Super solid now.

 

[Doubeleive]

Took yukon to tire shop today to remove present i got from trip to Ohio over i-75.

And also picked up Predator 2 unlocked tuner from Diablosport over the weekend, installed their tune and increased the idle rpm a little, mine was toooo low ( 500 ), yukon drives amaaaaazing now

I'll see your road hazard and raise you $500

 

[Doubeleive]

and I'm all in, there was 4 but one flew off and the 3rd I threw away

 

[gooffeyguy]

and I'm all in, there was 4 but one flew off and the 3rd I threw away
View attachment 389242

Don't forget them stationary road hazards that are about 7' high and have words written on them

 

[m1dn]

Don't forget them stationary road hazards that are about 7' high and have words written on them

Lmao, in Canada it says “Construction zone, road workers present”, Michigan doesnt **** around and simply puts signs with “Kill a worker - 7500$ fine and 15yrs in jail”

Still unsure whether it’s giving me a warning, challenge or just straight up a price tag.

 

[89Suburban]

Don't forget them stationary road hazards that are about 7' high and have words written on them

Damn, beat me to it.

 

[Geotrash]

Started out with an oil change in the driveway on our 2007 this afternoon and ended up replacing the oil block-off plate gasket and the radiator as both were leaking. 2.5 hours for everything, including a trip to the parts store and a couple of beers. She (her name is Delilah) had been in the garage resting while my wife and I were traveling, and when I took her to the liquor store over lunch today I could smell that sweet coolant smell when I got home in the driveway. Coolant reservoir was just a hair low and I traced the leak to what I thought was a crack on the driver's side end tank near where the power steering cooler line passes by it, down low. Got the radiator out and the real leak was where the end tank and core meet. The gasket had started weeping pretty good, so I'm glad I got it out before our trip to Snowshoe coming up this weekend.

Ended up buying the replacement locally. It's a Carquest Premium because I didn't have time to wait for one to be shipped in. The core was the same 34" wide but is only 1" thick vs about 1.25" for the original. So I checked all of the units on Rock Auto and they're all the same 1" thick core. Presumably it will be okay, but my wife and I have a trip to Colorado planned in June pulling a cargo trailer, so fingers crossed.

 

[Geoffsfas10]

Installed catch can tonight. Spent more time making the bracket then the rest of the install

 

[RooTBeeRthe1st]

Some places a little more north of here are being hit pretty bad by flooding and there's a lot of evacuations zones, but not so much where I am. Actually did some unintentional puddle bashing on the morning commute because of the large volume of rain we've had here.

 

[Rocket Man]

Some places a little more north of here are being hit pretty bad by flooding and there's a lot of evacuations zones, but not so much where I am. Actually did some unintentional puddle bashing on the morning commute because of the large volume of rain we've had here.

Where you at?