What did you do to your NBS GMT800 Tahoe/Yukon Today?

[Fosscore]

Swapped the 24s to the 05!! Much better and the Nali wheels don't look too bad in the 03 either.
Before

After

And some extras.

Sent from my iPhone using Tapatalk

Looking good. Nice switch on the wheels and what a ride to buy!!

Sweet.

 

[viv1d]

Polished my ride and my girls today. Been working on it for nearly 8 hours now.

 

[Rivieraracing]

Finally got around to swapping out my LS1.com fan harness that I had for 7 years to an OEM one I bought off of another member on here in the denali! Took me longer than I thought it would but is usually the case since I over think everything and want to get it all right the first time! Seems to work great so far, nice to finally have the relays next to the fuse box instead of next to the motor and all the heat!

 

[carduke]

Changed transmission oil and filter. Rotated the tires.

 

[David Paul]

Changed the rear differential oil and cleaned/painted the cover. Another good day in the garage. Next up is the front differential and transfer case along with the servo mod....

 

[05Single]

Swapped the 24s to the 05!! Much better and the Nali wheels don't look too bad in the 03 either.
Before

After

And some extras.

Sent from my iPhone using Tapatalk

I had to take a double look lol. You made the right switch for sure. Both look top notch

 

[Gzes]

Gave the escalade. Much needed face lift. New fender and pulled on the core support. Gotta finish pulling on the back and I'll be able to slap the tail gate on. Maybe then people won't think it's an avalanche..

 

[treehan77]

finally replaced the bulbs in the steering wheel switch for trip button. PITA!

 

[Five]

Put in the big transmission cooler, changed the tranny filter and made such a huge mess that I quit for the night...I'll wrap it up in the morning.

 

[welfarewagon]

New front struts and helper airbags rear.

 

[05Single]

Yessir. Number 845.

View attachment 59533

Good stuff or what?

 

[treehan77]

replaced the two burned out bulbs in my digital ac control. radio shack only had two bulbs. so of course i find out there is actually 4 out inside. i guess i suck at soldering, cause now theres another bulb out that worked when i had it on the bench. oh well, guess i'll do it again when radio shack restocks.

 

[Boxdgm]

Replaced my badly torn up drivers seat leather. Never did any upholstery work before so after watching a few vidoes it seemed a little intimidating but it was a really simple job.
Before:

After:

 

[elcapitanmas]

just finished chasing down a coolant leak (quick connects at heater core) new powerstop rotor and pad kit front and rear, new master cylinder and a couple front suspension fixes (pittman arm, ball joint, tie rod) not cheap but needed to be done. rides and stops like a dream now

 

[Fosscore]

Good stuff or what?

Replaced my badly torn up drivers seat leather. Never did any upholstery work before so after watching a few vidoes it seemed a little intimidating but it was a really simple job.
Before:

After:

Back to OEM. Nice.

 

[Fosscore]

Good stuff or what?

Man I do love this stuff. We use it on the boats all the time and the Tahoe just sheds the water after application.

This is the ultimate write up.
http://www.autogeekonline.net/forum...e-845-definitive-how-guide-legendary-wax.html

@05Single

 

[Boxdgm]

Back to OEM. Nice.

Thanks, now i just have to clean the rest of the leather to make the color match up again.

 

[Boxdgm]

Did some maintenance and spring cleaning today. Replaced both hubs, pass outer tie rod end and idler arm. Then i cleaned the MAF and throttle body and sucked a can of seafoam through the brake booster vacuum line. Handles much better and runs smoother now.

 

[05Single]

Did you just say SPRING already ?!! ^^^

 

[#1taho]

Got may stainless steel brake line kit yesterday and starting to install it today. Looks like a lot of fun


Sent from my iPhone using Tapatalk