Townsend
Member
- Joined
- Jan 2, 2014
- Posts
- 45
- Reaction score
- 1
Parked.
What did you do to your NBS GMT800 Tahoe/Yukon Today?
- Thread starter vwbeaner
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
CHOO CHOO
BackPagePhil
Parked.
Always thought those signs were ********. Oh hey, your better for the environment so we are gonna give you a perk. Blah blah
SLCHOE
ASE Master Certified + (L1)
Replaced my oil pressure sensor. (was pegged at 80 psi)
Replaced my rear HVAC module. (was stuck on heat)
Antenna delete.
All good now.
Replaced my rear HVAC module. (was stuck on heat)
Antenna delete.
All good now.
orangesilvie
TYF Newbie
I walked by her in the driveway, and rubbed her hood...
Bomba02
Full Access Member
- Joined
- Mar 27, 2013
- Posts
- 371
- Reaction score
- 9
Looks good I want to do this to my nali or smoothed ones
Billy
---------- Post added at 08:51 PM ---------- Previous post was at 08:34 PM ----------
Finally got my 194 blue l.e.d bulbs, my 5mm led and correct resistors. Some of my factory light switches have died. So I'm gonna switch all factory lights to blue l.e.d's. Today I started the update. Installed the 194's in the cluster. Looks great love it.
Cliff note: I already have bright white l.e.d's in domes, spots, and puddles etc. lights.
Billy
@Da 90---the Esky caps look good
@Bomba02--great job on the cluster
Finally decided to swap out my fog lamp lenses. One was faded, the other had moisture in it, and both were very chipped. They were the originals. Soaked them with PB blaster for a few days-the nuts were so rusted. One on each side wouldn't budge and began to spin the entire bolt so I had to take off the front bumper cover to get at the heads. To dark for a completed pic-maybe tomorrow when I give her a bath-supposed to get to 50*. Also got to fill her up and its $3.99 for premium currently.....boo.
Old vs. New
@Bomba02--great job on the cluster
Finally decided to swap out my fog lamp lenses. One was faded, the other had moisture in it, and both were very chipped. They were the originals. Soaked them with PB blaster for a few days-the nuts were so rusted. One on each side wouldn't budge and began to spin the entire bolt so I had to take off the front bumper cover to get at the heads. To dark for a completed pic-maybe tomorrow when I give her a bath-supposed to get to 50*. Also got to fill her up and its $3.99 for premium currently.....boo.
Old vs. New
Attachments
JochenWoern
Full Access Member
Sweet!!!!!! ESKY Caps are the only way to go IMO.
Goodinblack
I Like Tacos
Esky caps lookn so good
mharders
Full Access Member
J, where did you pick those up? Mine look the same as yours.
Sent from my SAMSUNG-SM-N900A using Tapatalk
Sent from my SAMSUNG-SM-N900A using Tapatalk
From here: http://www.1aauto.com/1A/fog-lights/GMC/Yukon/1ALFP00204/512060/2006
And I didn't forget about the wheel-will find it tomorrow and shoot ya a pic or two...
mharders
Full Access Member
Thank you sir! No worries on the wheel, just lemme know whenever you get a chance to find it
Sent from my SAMSUNG-SM-N900A using Tapatalk
Sent from my SAMSUNG-SM-N900A using Tapatalk
Leather and vinyl Dye Colorant
DAMN your shizzle is bustdizzle
Goodinblack
I Like Tacos
Mechahead
Member
Threw in a el-cheapo set of yellow fogs to see how I like them before I pull the trigger on a good set of bulbs.
Oh, and found out the rubber cap on the locking receiver pin came off and now it won't unlock. Guess I will have to cut it off and get another one.
Oh, and found out the rubber cap on the locking receiver pin came off and now it won't unlock. Guess I will have to cut it off and get another one.
Similar threads
