What did you do to your NBS GMT800 Tahoe/Yukon Today?

[Goodinblack]

 

[boozer]

That sucks Boozer. Good thing the one side didn't fall off, that would have sucked. Crazy the bolts fell completely out. Glad to hear you caught it before something happened. I almost had the same thing happen 2 months ago. Even with nylon lock bolts, they managed to come loose and started making all kinds of noise. Used some locktite on them, hopefully solves the problem.
I was thinking about writing a thread letting others know to possibly look out for that. But really didn't think anyone else would have the same problem, just me. Lol, some reason they must like to work loose.

Yea it was pretty scary. I been hearing a noise for about a week, it sounded like u joints so I thought I had a little time to get to it. Note to self, hear a new noise check it out ASAP, lol. Had to dog leg it about 10 miles home. I'm getting better bolts today with lots of loctite. Wish this ice would melt faster so I'm not laying in water the whole time working on it

 

[Yukongk]

Photo is fixed. Every time I upload from my phone, the photo is flipped....

 

[OHSIXX]

Threw in 3000K bulbs in the fogs for winter...gonna wash it tomorrow-supposed to get up to 38 degrees. But then come Monday-highs in the single digits and lows in the negative single digits....gotta love WI winters

 

[Pachanga02]

About to add 3000k bulbs to my fogs as well. Maybe tomorrow a much needed wash.

 

[Vigh_J]

About to add 3000k bulbs to my fogs as well. Maybe tomorrow a much needed wash.

Post pics.. I was thinking about this also

 

[JochenWoern]

Washed and detailed mine today. Blue skies and mid sixties here in Northern Cali, no single digits in the forecast, but more sunshine for the upcoming week. ;-)

 

[Rivieraracing]

Washed and detailed mine today. Blue skies and mid sixties here in Northern Cali, no single digits in the forecast, but more sunshine for the upcoming week. ;-)

You lucky dog, our weather is still cold, wet, and our truck has a protective layer of de-icer all over it!! ahhaha

 

[Mechahead]

Finally put the diodes that have been living in the glove box for a few weeks to good use and did the six high mod.

 

[Vigh_J]

She threw a code last night, P0303 - cylinder 3 misfire. So in went plugs and wires.. hope thats the fix. I also heard that a cat starting to fail can trigger a misfire DTC?

 

[Tylus]

fixed my rough idle with new plugs...100,000 mile plugs my butt!

Esky has 65k miles and the AC Delco plugs looks wore out. Much smoother idle now

 

[nickbaldwin86]

Got my bike carrier all figured out...

 

[Rivieraracing]

Got my bike carrier all figured out...

That's awesome, probably works great with the air shocks in the back of the denali too! Any sag?

---------- Post added at 07:16 PM ---------- Previous post was at 07:12 PM ----------

Also very smart to take the seat off during transporting it, I've known quite a few folks that came home from a trip and found out that they lost theirs somewhere along the road!

 

[middelgriff1]

Installed new intake manifold gaskets. Wasn't as bad as i thought it would be

 

[scoobyxj]

Finally put the diodes that have been living in the glove box for a few weeks to good use and did the six high mod.

I did the same thing only I chose only to do the 4high, and I did mine under the dash at the BCM.


Stay tuned for auto fogs on auto headlamps. I think I figured it out just got to do some testing!!!

 

[nickbaldwin86]

That's awesome, probably works great with the air shocks in the back of the denali too! Any sag?


Also very smart to take the seat off during transporting it, I've known quite a few folks that came home from a trip and found out that they lost theirs somewhere along the road!

the air shocks leveled it out perfect... the bike weighs 230lbs so its really no different then a few fat people in the rear... lol

The Denali is legit... one main extra reason I went with it was the air-ride.

The seat was only off because I am putting on a new seat cover... I do NOT transport my bike without the seat on. It shouldn't ever come off in transit, it has two large bolts holding it off. and the air filter would be open to the elements, rain would fall right into the air intake... not good

 

[Rivieraracing]

the air shocks leveled it out perfect... the bike weighs 230lbs so its really no different then a few fat people in the rear... lol

The Denali is legit... one main extra reason I went with it was the air-ride.

The seat was only off because I am putting on a new seat cover... I do NOT transport my bike without the seat on. It shouldn't ever come off in transit, it has two large bolts holding it off. and the air filter would be open to the elements, rain would fall right into the air intake... not good

Didn't know motorcycle seats are bolted on, our banshee quad seats are just latched on and have been known to fly off of them during transit if they weren't latched down correctly!

 

[nickbaldwin86]

Didn't know motorcycle seats are bolted on, our banshee quad seats are just latched on and have been known to fly off of them during transit if they weren't latched down correctly!

oh that would suck... ya two 10mm bolts hold on my seat.

 

[Mechahead]

Went and picked up a HD hood. I was worried when the guy said the price, but its perfect and it was only $50. had a bug guard on it so there are no stone chips and no dings. Just have to get a buddy to paint it for me.

 

[JochenWoern]

Went and picked up a HD hood. I was worried when the guy said the price, but its perfect and it was only $50. had a bug guard on it so there are no stone chips and no dings. Just have to get a buddy to paint it for me.

SWEET!!!!!

Sure you did not want a cowl hood???? ;-)