Mechahead
Member
Finally put the LED bulbs in the puddle lamps. Still waiting for the bulbs for the map lights.
What did you do to your NBS GMT800 Tahoe/Yukon Today?
- Thread starter vwbeaner
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Vigh_J
Full Access Member
I just did this last week.. I found a kit on eBay.
Mechahead
Member
I was looking at those, but didn't see a kit for the Suburban. That and with the set that I bought I did all the regular domes, puddle lamps, and had one left over for the dome in the 81 rabbit.
I did manage to give the truck a bath today.
Mechahead
Member
Located an HD hood for a good price, just have to figure out when I have time to go get it.
Vigh_J
Full Access Member
Yeah the kit I bought was for the suburban, ESV etc.. so I have left overs.. kit included dome, maps, doors, vanity, plate, reverse and puddles.
Sent from my SGH-I747M using Tapatalk
---------- Post added at 12:00 AM ---------- Previous post was Yesterday at 11:59 PM ----------
Pachanga02
Full Access Member
Well I drove it back home from Florida and was lucky to have to change my driver side hub assembly in Virginia. Drove through North Carolina with the hub in 2 pieces untill I noticed that it sounded like my caliper had seized and my brakes were gone. Luckily for my wife and kids I always carry a toolbag with stuff I would need, pulled into an autozone and was able to buy and change out old hub and check brakes on both sides in about an hr and a half.
Vac, wash, wax so far this morning in prep for about 1,200 miles in next couple days.
Rivieraracing
Full Access Member
Seat heaters came for my drivers seat way earlier in the day than I thought they would, now just gotta get the time tonight to get at installing them! 
My baby is sitting in front of the Westin poinset valet out front. Guy said "yea umm park over there next to the Benz I don't thing it will fit in the garage." And I don't feel like earning to drive that!
None the less I know where the Tahoe is.
None the less I know where the Tahoe is.
Seat heaters came for my drivers seat way earlier in the day than I thought they would, now just gotta get the time tonight to get at installing them!
Its easy. Pulled mine off twice already. lol
Hey, at least he did not try it and say opps and come in and say we have a problem. Honesty that i would respect from them. Here forget it, they would of pulled it right in and then blamed me for the damage.
What did i do.
Looked at all the brown sut all over my tahoe. Looks like it rained mud. (suppose to be from mexico volcano or something.)
Westin Poinset is one of the nicer hotels in town. It chilled with a plat eski, 2 Benz. Some big ass Lexus and a euro sports car out front. Good thing she got a wash and detail this morning.
Yup the brother was like "nope you can park it next to that 550 and it will be their when you finish. And it was. And I'm home at the inlawas
Yup the brother was like "nope you can park it next to that 550 and it will be their when you finish. And it was. And I'm home at the inlawas
Rivieraracing
Full Access Member
Changed out both seat heater pads for the denali drivers seat......and still don't get any heat! BIG OL CRAP!!
Thought I had figured it out when I pulled the back rest one and it had a burnt up spot in it, the bottom one looked practically brand new!
Looks like I'll be checking some more stuff out now that I know which plugs are the seat heater ones!
Thought I had figured it out when I pulled the back rest one and it had a burnt up spot in it, the bottom one looked practically brand new!
Looks like I'll be checking some more stuff out now that I know which plugs are the seat heater ones!
Bomba02
Full Access Member
- Joined
- Mar 27, 2013
- Posts
- 371
- Reaction score
- 9
oil change, license plate bulb replacement l.e.d, ground mod on rear washer pump. (pass. side fog still doesnt work).
Billy
Billy
boozer
Full Access Member
Well I had to spend the Christmas Eve under the tahoe laying on ice and snow cause my control arm relocation bracket bolts seamed to work there way loose. Santa didn't help. Come to find out all 3 bolts on passenger side were gone and 2 on drivers side were also gone.
Last edited:
Finally finished up replacing suspension. 2" bt drop spindles in front, 4" lowering springs in rear (with spacer for 3" drop), bt shocks all around, front and rear DJM sway bars, new moog ball joints, new moog outer tie rod ends....think that's about it. Gonna wait and see how it settles out and may remove spacer. Now have to get an alignment and the resistors to stop the code.
Thanks to Tony for getting the parts to me and for helping out with questions!
Thanks to Tony for getting the parts to me and for helping out with questions!
cleaned the insides out of the headlights using denatured alcohol and DI water. stupid things had hazed over inside
of course didn't get all the water out unfortunately, so blew a DRL in 1 side, and a blinker in the other. $13 later and now I have all working bulbs and re-dried the heads
much brighter light now though with the haze gone
got a link to that?
I'd like to brighten up the insides a bit
of course didn't get all the water out unfortunately, so blew a DRL in 1 side, and a blinker in the other. $13 later and now I have all working bulbs and re-dried the heads
much brighter light now though with the haze gone
got a link to that?
I'd like to brighten up the insides a bit
scoobyxj
Full Access Member
- Joined
- Oct 24, 2013
- Posts
- 176
- Reaction score
- 3
x2 Ive heard it's pretty easy to do the headlamp lenses, but the DTR/turn portion seems glued together....
super easy to clean the haze out...not so much to get all the water out. I had to use a blowdryer for 10-15 minutes each headlight.
I can't believe GM/Caddy made such a convoluted headlight! WTH is with that design?
I can't believe GM/Caddy made such a convoluted headlight! WTH is with that design?
That sucks Boozer. Good thing the one side didn't fall off, that would have sucked. Crazy the bolts fell completely out. Glad to hear you caught it before something happened. I almost had the same thing happen 2 months ago. Even with nylon lock bolts, they managed to come loose and started making all kinds of noise. Used some locktite on them, hopefully solves the problem.
I was thinking about writing a thread letting others know to possibly look out for that. But really didn't think anyone else would have the same problem, just me. Lol, some reason they must like to work loose.
Similar threads
