What did you do to your NBS GMT800 Tahoe/Yukon Today?

[Tonyrodz]

There was just something about how he does business that I didn’t like...


Sent from my iPhone using Tapatalk

I can understand that.

 

[DenaliReyes]

New thermostat, New housing,, New belt tensioners, New belts, New waterpump and hos, es...
Be cool baby, be cool

 

[blueinkd]

Did the same job bout 5 weeks ago. Sits well below the 200* mark now. I noticed the upper rad hose pipe was starting to get a bit wet around the joint where it slips into pump housing. Replaced all hoses and Ts also

 

[Woodblocker55]

My 2006 gmc yukon xl runs at about 206f all the time .. It got new radiator hoses etc thermostats ,tranny lines etc ..I even changed antifreeze sensor temp.. still right at 206 f but sensors right on the head on passenger side front..

Sent from my LGL722DL using Tapatalk

 

[mattbta]

Ended up having to take quite a bit out to get to it. Also ordered a pass-thru 1/4" set which was the only way I could manage to get a socket on those two sumbitches! Got everything reassembled except for the dash cover and passenger vents. Notice I apparently wasn't gentle enough with the cover and cracked the plastic under the metal mounting clip at the corner end. Going to attempt a JB Weld repair so need to do that and let it cure.

Started it up and let it run its calibration. Seems ok...will test drive later!

 

[blueinkd]

Dios mio!! Looks like some work!!

 

[Matthew Jeschke]

Ended up having to take quite a bit out to get to it. Also ordered a pass-thru 1/4" set which was the only way I could manage to get a socket on those two sumbitches! Got everything reassembled except for the dash cover and passenger vents. Notice I apparently wasn't gentle enough with the cover and cracked the plastic under the metal mounting clip at the corner end. Going to attempt a JB Weld repair so need to do that and let it cure.

Started it up and let it run its calibration. Seems ok...will test drive later!

View attachment 261735 View attachment 261736

I too had problems first time with those dumb clips by windshield. acutally JB welded crap out of my cover to reinforce them.

Sent from my SM-A505U using Tapatalk

 

[NoReverseYukon]

My weep hole is leaking !

I can get a Gates 45006 or an ACDelco 252-845 for about the same $$$.

Any preferences either way ?

 

[Mezzo]

Scored some appliques,a spare Esky cluster and Finally got the third brake light ive been searching for,all for 145.

 

[treehan77]

My weep hole is leaking !

I can get a Gates 45006 or an ACDelco 252-845 for about the same $$$.

Any preferences either way ?

I went with ACC delco when I did mine, but gates hoses

 

[wjburken]

My weep hole is leaking !

I can get a Gates 45006 or an ACDelco 252-845 for about the same $$$.

Any preferences either way ?

AC Delco 12703898 is the OEM grade water pump.

AC Delco 252-845 is their Gold or Professional series pump.

Go with the OEM, not Professional. It’s $40-$50 more but will give more piece of mind.

 

[Mezzo]

Mounted up the esky brake light I finally got my hands on and put on the appliques to help decide color. Should I color match them or black them out?

 

[GJones]

Mounted up the esky brake light I finally got my hands on and put on the appliques to help decide color. Should I color match them or black them out?

View attachment 261973 View attachment 261974

Black out of course


Sent from my iPhone using Tapatalk

 

[Sam Harris]

Mounted up the esky brake light I finally got my hands on and put on the appliques to help decide color. Should I color match them or black them out?

View attachment 261973 View attachment 261974

Black IMHO..

 

[Mezzo]

Black IMHO..

Damn, that looks so clean,i think Black is going to be the winner.

 

[GJones]

Black IMHO..

Dude how much of pipes can you see from the back?!


Sent from my iPhone using Tapatalk

 

[Dekindre17]

Mounted up the esky brake light I finally got my hands on and put on the appliques to help decide color. Should I color match them or black them out?

View attachment 261973 View attachment 261974

 

[Sam Harris]

Dude how much of pipes can you see from the back?!


Sent from my iPhone using Tapatalk

 

[GJones]

Yours doesn’t look bad at all. I want a black tip but don’t want the og pipe to show ya know.


Sent from my iPhone using Tapatalk

 

[Sam Harris]

Yours doesn’t look bad at all. I want a black tip but don’t want the og pipe to show ya know.


Sent from my iPhone using Tapatalk

Yeah it’s not bad. About the same as stock.