BADRIDES
Full Access Member
- Joined
- Dec 18, 2015
- Posts
- 1,825
- Reaction score
- 1,278
Ditto
What did you do to your NBS GMT800 Tahoe/Yukon Today?
- Thread starter vwbeaner
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Dantheman1540
Full Access Member
CountMinsi
TYF Newbie
I replaced a totally rotted out exhaust hanger and adjusted my hood bump stops to get rid of some hood flutter. Sometimes it’s the little things that make you happy!
I also tried to quiet down the steering clunk with a hose clamp tightened above the plastic bearing (still original). It doesn’t seem to have done anything. I might give it another turn or two.
I’m still chasing an intermittent long crank after driving then parking for a bit. Already did fuel pump, MAF, and tune up.
I also tried to quiet down the steering clunk with a hose clamp tightened above the plastic bearing (still original). It doesn’t seem to have done anything. I might give it another turn or two.
I’m still chasing an intermittent long crank after driving then parking for a bit. Already did fuel pump, MAF, and tune up.
Hehe. Yeah I think it looks good. [emoji106][emoji16]
Arrrggghhh You Chrome enabler!Burn you paint match pirate!
ivin74
05 NBS Nali
ivin74
05 NBS Nali
CountMinsi
TYF Newbie
Yup. OEM. The old one was very rusty and rotted. I could smell fuel when I filled up.
ivin74
05 NBS Nali
CountMinsi
TYF Newbie
Not yet. Any guidance on how to test it? I’ve replaced the starter, so I know how to get to it. Thanks.
It might be a bit before I get to going after it. Been “traveling” full time with my family in our RV. By traveling I mean set up in a campground after selling our house in March to travel but having the plan interrupted for obvious reasons!
It is too hot to be doing this shit
Then don’t.... go to the beach...
The beach around here is cold probably like 60deg and overcast/foggy plus it's 1.5-2hrs each way IF there is no traffic.
Making progress......
Wtf are you doing now?
Headunit, amps, backup cam, speakers are already done. All the wires are ran now i will finish it up tomorrow I guess
Economy install, lol I think I have spent about $700 for parts, used door speakers rear 6.5" kickers were $60, front nakamichi components $80, new alpine head unit $300, used sub amp $60, then amp kit and pac adapter and swc adapter not sure if I have the right one but I'll find out, backup cam off Amazon, justpieced it all together, getting that dam 0 gauge thru the firewall grommet was the hardest part, once I got it thru I sprayed it with wd40 and she went like greased lightening
Gotta have tunes.
Tru dat
Wx4caster
TYF Newbie
- Joined
- Aug 9, 2020
- Posts
- 3
- Reaction score
- 20
Added a Boost wireless charging pad to the center armrest. Looks OEM.
(Yes, I'm a newbie and still can't figure out how to post my avatar).
(Yes, I'm a newbie and still can't figure out how to post my avatar).
Similar threads
