BADRIDES
Full Access Member
- Joined
- Dec 18, 2015
- Posts
- 1,730
- Reaction score
- 1,139
Ditto
What did you do to your NBS GMT800 Tahoe/Yukon Today?
- Thread starter vwbeaner
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Dantheman1540
Full Access Member
CountMinsi
TYF Newbie
I replaced a totally rotted out exhaust hanger and adjusted my hood bump stops to get rid of some hood flutter. Sometimes it’s the little things that make you happy!
I also tried to quiet down the steering clunk with a hose clamp tightened above the plastic bearing (still original). It doesn’t seem to have done anything. I might give it another turn or two.
I’m still chasing an intermittent long crank after driving then parking for a bit. Already did fuel pump, MAF, and tune up.
I also tried to quiet down the steering clunk with a hose clamp tightened above the plastic bearing (still original). It doesn’t seem to have done anything. I might give it another turn or two.
I’m still chasing an intermittent long crank after driving then parking for a bit. Already did fuel pump, MAF, and tune up.
Sam Harris
Supporting Member
Hehe. Yeah I think it looks good. [emoji106][emoji16]
Arrrggghhh You Chrome enabler!Burn you paint match pirate!
ivin74
05 NBS Nali
ivin74
05 NBS Nali
CountMinsi
TYF Newbie
Yup. OEM. The old one was very rusty and rotted. I could smell fuel when I filled up.
ivin74
05 NBS Nali
CountMinsi
TYF Newbie
Not yet. Any guidance on how to test it? I’ve replaced the starter, so I know how to get to it. Thanks.
It might be a bit before I get to going after it. Been “traveling” full time with my family in our RV. By traveling I mean set up in a campground after selling our house in March to travel but having the plan interrupted for obvious reasons!
