What did you do to your NBS GMT800 Tahoe/Yukon Today?

[fresh350]

Please let us know your thoughts on it. Was it worth it?

Honestly haven't driven it yet... but I will post up what I think tomorrow.

 

[06 Yukon XL]

I took the plates off my former stolen ride (2006 Yukon XL) that was recovered by police on this past Friday and said good bye to her. Closure finally, RIP 2006 Yukon XL, you were a great ride. More can be seen in thread
My former 2006 stolen Yukon XL recovered

 

[Tonyrodz]

I took the plates off my former stolen ride (2006 Yukon XL) that was recovered by police on this past Friday and said good bye to her. Closure finally, RIP 2006 Yukon XL, you were a great ride.

That sux. How bad was it? Totalled?

 

[06 Yukon XL]

That sux. How bad was it? Totalled?

The insurance company owns it now and I believe they will write it off. Motor and tranny were good . The body is a bit smacked up but they left engine and transmission intact so who knows. When I contacted the insurance they said they were going to pick it up so it may not even be at that yard anymore. The interior was also intact. It was a great truck and drove real nice. it went on its last long trip Hamilton to Pittsburgh and back just a couple weeks before it was stolen.

 

[Tonyrodz]

The insurance company owns it now and I believe they will write it off. Motor and tranny were good . The body is a bit smacked up but they left engine and transmission intact so who knows. When I contacted the insurance they said they were going to pick it up so it may not even be at that yard anymore. The interior was also intact. It was a great truck and drove real nice. it went on its last long trip Hamilton to Pittsburgh and back just a couple weeks before it was stolen.

Gonna look for another nbs?

 

[06 Yukon XL]

Gonna look for another nbs?

Now 2010 Yukon XL

 

[Tonyrodz]

Now 2010 Yukon XL

Good luck!

 

[Rocket Man]

I ordered a set of American Racing longtubes today.

 

[Tonyrodz]

I ordered a set of American Racing longtubes today.

I wish I had the $$ for those. Getting a y pipe too? Hey @Red Rocket we need a clip of your Whipple in action!

 

[Rocket Man]

I wish I had the $$ for those. Getting a y pipe too? Hey @Red Rocket we need a clip of your Whipple in action!

Yeah catted Y pipe. And they're guaranteed to work with my AWD, I did my research. I'll try to post a video of the Whipple soon. I'll have to get someone to rev it a bit while I video it.

 

[Tonyrodz]

Yeah catted Y pipe. And they're guaranteed to work with my AWD, I did my research. I'll try to post a video of the Whipple soon. I'll have to get someone to rev it a bit while I video it.

Also gotta do a clip with your speedo. We love that stuff around here! Lol

 

[HiHoeSilver]

Yeah catted Y pipe. And they're guaranteed to work with my AWD, I did my research. I'll try to post a video of the Whipple soon. I'll have to get someone to rev it a bit while I video it.

Don't think this will prove too difficult.... 'Hey, you wanna come rev my race truck while I video it?' lol.

 

[Rocket Man]

Also gotta do a clip with your speedo. We love that stuff around here! Lol

Theres one of those in my build thread, right after I installed it the second time lol. A good clip that shows my boost and a take off from a slow roll,1-2 shift at 5500 rpm.

 

[tbisaacs]

I used it!

Sent from my iPhone using Tapatalk

 

[Austinite]

who did that dash conversion?, is that the metra?

Yeah, it's the Metra DP300-2B Double Din Dash kit.

 

[fresh350]

Please let us know your thoughts on it. Was it worth it?

So first impression was that it had a lot more pep off the line... as far as the butt dyno goes, you can definitely feel the difference. In my case with the big cam, I think it helped its lower rpm manners (maybe the increased airflow is helping?). All in all I'm happy with the swap and it was fairly easy compared to other mods I've done (previous vehicles and customers vehicles).

I do suggest getting the TBSS fuel rail for an easier install and you can get the X-Link or the adapter plate (either way is more or less plug and play)

 

[1992rs]

So first impression was that it had a lot more pep off the line... as far as the butt dyno goes, you can definitely feel the difference. In my case with the big cam, I think it helped its lower rpm manners (maybe the increased airflow is helping?). All in all I'm happy with the swap and it was fairly easy compared to other mods I've done (previous vehicles and customers vehicles).

I do suggest getting the TBSS fuel rail for an easier install and you can get the X-Link or the adapter plate (either way is more or less plug and play)

Does your stock engine covers still fit?


Sent from my iPhone using Tapatalk

 

[fresh350]

Does your stock engine covers still fit?


Sent from my iPhone using Tapatalk

I think it might and I will try it later but I have a TBSS cover that I will be using... I have to trim it a little cause my intake tube is too big and not letting it come all the way down.

 

[cmc76]

powerstop rotors. raining out, so didnt get to paint the calipers. disregard the flaking rims, that actually look impressive from a football field distance away

 

[PG01]

I think it might and I will try it later but I have a TBSS cover that I will be using... I have to trim it a little cause my intake tube is too big and not letting it come all the way down.

My tube is too big too..... or so i think......