What did you do to your NBS GMT800 Tahoe/Yukon Today?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Newkon

Member
Joined
Nov 20, 2016
Posts
38
Reaction score
18
Replaced intake manifold gasket, valley cover gasket, knock sensors, and am now in the process of cleaning the fuel injectors before i put the fuel rail back in.

IMG_1892.JPG
 

Bowzer

Full Access Member
Joined
Nov 8, 2015
Posts
113
Reaction score
173
Location
SoCal
Swapped out the starter. What a pita. Not much room between the control arm to get it moved. Probably not bad on a lift. Even worse than a el Camino I used to have with long headers!
 

mmeachem

Member
Joined
Apr 12, 2010
Posts
1,031
Reaction score
96
Recieved an amazon package with things for my led bar install and had a rusted tail pipe fixed.


Sent from my iPhone using Tapatalk
 

jarydM

Lost in the Woods
Joined
Jun 8, 2014
Posts
616
Reaction score
661
Location
Tennessee
Finally replaced front diff fluid. I've had that in the garage for waay too long. Old fluid was not in great shape, no large pieces of metal or horrendous smell from the old fluid though thank goodness. So far it seems quieter! Happy about that, since it was developing a subtle whine at times previously. I used https://www.amazon.com/gp/product/B00MRZFYEI/ref=oh_aui_search_detailpage?ie=UTF8&psc=1 based on @1992rs' recommendation:

How did you go about this? is there a write up somewhere I haven't found?
 

SnowDrifter

Full Access Member
Joined
Sep 5, 2016
Posts
2,484
Reaction score
2,896
Location
Sasquatch Country
How did you go about this? is there a write up somewhere I haven't found?
on write up needed. There's drain plug and a fill plug. Take out the fill plug first, 15mm IIRC. Then remove the 13mm drain plug.

Clean the magnet, toss the drain plug in, fill the thing with fluid until it dribbles out the fill hole then install the plug there as well.

Super easy don't sweat it ;)
 

jarydM

Lost in the Woods
Joined
Jun 8, 2014
Posts
616
Reaction score
661
Location
Tennessee
on write up needed. There's drain plug and a fill plug. Take out the fill plug first, 15mm IIRC. Then remove the 13mm drain plug.

Clean the magnet, toss the drain plug in, fill the thing with fluid until it dribbles out the fill hole then install the plug there as well.

Super easy don't sweat it ;)
thanks, Hadn't really been underneath it to look for it with the weather, gonna put it in the garage this weekend and try.
 

DDenali

Full Access Member
Joined
Mar 4, 2014
Posts
559
Reaction score
501
Location
Orangeburg, SC
on write up needed. There's drain plug and a fill plug. Take out the fill plug first, 15mm IIRC. Then remove the 13mm drain plug.

Clean the magnet, toss the drain plug in, fill the thing with fluid until it dribbles out the fill hole then install the plug there as well.

Super easy don't sweat it ;)
It is super easy well said bud


Sent from Dugar's iPhone 7 Plus using Tapatalk
 

Forum statistics

Threads
137,786
Posts
1,992,234
Members
102,780
Latest member
ASG-MikeS

Latest posts

Back
Top