DDenali
Full Access Member
Niceeeeeeee I'll be upgrading very soon
Sent from Dugar's iPhone 7 Plus using Tapatalk
Sent from Dugar's iPhone 7 Plus using Tapatalk
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
I'm not sure where they tie in normally but I think it has a built-in in switch so you could wire it hot.@Red Rocket , I'll have to keep my,eye out in eBay for one of those then. Where would I tie into wires to get them working?

The Force is strong with this one! Haha..Added led strip lighting under the hood, tied into the stock gravity light so they come on automatically.
View attachment 71466
View attachment 71467
Lol, I thought the same thing!The Force is strong with this one! Haha..
Sent from my SAMSUNG-SM-G900A using Tapatalk
Oh myyyyyy looking goodAdded led strip lighting under the hood, tied into the stock gravity light so they come on automatically.
View attachment 71466
View attachment 71467
Finally replaced front diff fluid. I've had that in the garage for waay too long. Old fluid was not in great shape, no large pieces of metal or horrendous smell from the old fluid though thank goodness. So far it seems quieter! Happy about that, since it was developing a subtle whine at times previously. I used https://www.amazon.com/gp/product/B00MRZFYEI/ref=oh_aui_search_detailpage?ie=UTF8&psc=1 based on @1992rs' recommendation:
on write up needed. There's drain plug and a fill plug. Take out the fill plug first, 15mm IIRC. Then remove the 13mm drain plug.How did you go about this? is there a write up somewhere I haven't found?
thanks, Hadn't really been underneath it to look for it with the weather, gonna put it in the garage this weekend and try.on write up needed. There's drain plug and a fill plug. Take out the fill plug first, 15mm IIRC. Then remove the 13mm drain plug.
Clean the magnet, toss the drain plug in, fill the thing with fluid until it dribbles out the fill hole then install the plug there as well.
Super easy don't sweat it![]()
It is super easy well said budon write up needed. There's drain plug and a fill plug. Take out the fill plug first, 15mm IIRC. Then remove the 13mm drain plug.
Clean the magnet, toss the drain plug in, fill the thing with fluid until it dribbles out the fill hole then install the plug there as well.
Super easy don't sweat it![]()